AT&T 518-600-016 manual Direction, Line type outgoing Signal type, Line, then press Enter

DEFAULT TIE LINE SETTINGS

The default settings for tie line options are summarized below in Table 3-3.

TABLE 3-3 Default Tie Line Settings

Tie Line Option Default Setting

Answer supervision time Dial mode (incoming line) Dial mode (outgoing line) Dial Tone

Direction

Disconect Time (incoming) Disconect Time (outgoing)

Inward Dial Plan Line type (incoming)

Line type (outgoing)

Signal type

300ms Rotary Rotary Remote Two way 300 ms

300 ms

Four digits, 4010 through 4097 Wink start

Wink start Type 1 Standard

SELECTING THE DIRECTION

To select the direction on which tie line calls can be initiated, follow these steps:

1 Enter administration mode by sliding the T/P switch to

P.

2 Press Conference twice.

The administration menu appears.

3Press [More], [More], [More], [TieLines], [Dirctn].

The direction screen appears.

4 Dial the line number or press the line button of a tie

line, then press [Enter].

Administering a New System 3-53