4 Leave programming mode by sliding the T/P switch to the center position.
NOTE: Digital phones: Dial #00.
Call Coverage
The Call Coverage feature allows you to cover calls, including intercom calls, for other voice terminals in your system. To program this feature, follow these steps:
1Label a button with lights.
2Enter programming mode by sliding the T/P switch to P.
NOTE: Digital phones: Dial #33.
Press the button just labeled that you want to program.
3Dial ✱ 40 to assign primary coverage or ✱ 50 to assign a secondary coverage;
4Dial the intercom number of the person you are covering.
5To assign a Ringing Option, press the Cover button, then dial the appropriate code for the type of ringing you prefer:
>Dial ✱ 35 for no ring.
The red light next to the button goes off.
>Dial ✱ 36 for delayed ring.
The red light next to the line button flashes.
>Dial ✱ 37 for immediate ring.
The red light next to the line button goes on steady.
6Program another feature or leave programming mode by sliding the T/P switch to the center position.
NOTE: Digital phones: Dial #00.
