AT&T 518-600-016 manual Inward Dial Plan Numbers. Four digits through

>Answer Supervision Time. 300 ms

>Dial Tone. Remote

>Incoming Disconect Time. 300 ms

>Incoming Line Dial Mode. Rotary

>Incoming Line Type. Wink start

>.Inward Dial Plan Numbers. Four digits. 4010 through 4097

>Line Direction. Two way

>Outgoing Disconect Time. 300 ms

>Outgoing Line Dial Mode. Rotary

>Outgoing Line Type. Wink start

>Signaling Type. Type 1 Standard

•Touch-Tone signaling. Touch-Tone signals are the default.

•Transfer Return Interval. The Transfer Return interval is set at four rings.

ADMINISTERING IN SEVERAL SESSIONS

•Voice Terminal type. BIS/HFAI (raised plastic button) sets are the default.

Compare these default settings with the entries on the System Configuration Form for Feature Modules 1 and 2 or Form le, System Form-Requirements and Options to determine whether any setting must be changed.

You can leave administration mode before you’ve finished setting all the operating conditions and optional features for the system. Just complete the procedure you are performing, then slide the T/P switch to the center position. When you’re ready to continue, follow the steps under “Enter Administration Mode” below, and resume administration at the point where you stopped.

Before Administering a Svstem 3-17