ASSEMBLING THE VOICE TERMINALS
The following voice terminal items come boxed together:
Voice terminal body
●Handset
●Coiled handset cord
●Modular voice terminal cord
●Desk stand and/or wall mount
●Instructions for assembling the voice terminal
Refer to Figure
1Attach the desk stand or wall mount to the voice terminal.
2Plug one end of the coiled handset cord into the handset.
3Plug the other end of the coiled handset cord into the jack near the handset rest at the lower edge of the voice terminal body. The jack may also be located at the base of the voice terminal body next to the handset symbol.
4Make sure that the Test/Program (T/P) switch, also On the left side of the voice terminal, is set to the center position. If the switch is set to T or P, the voice terminal will begin ringing as soon as you connect it to a system that is turned on.
5Slide the volume control on the left side of the voice terminal to the center position to adjust the ringer volume.
6Thread the modular voice terminal cord between the desk stand and back of the voice terminal, then plug the cord into the jack labeled “LINE” on the voice terminal.
Connecting the Voice Terminals
