AT&T 518-600-016 manual Set system operating conditions

TO ENTER ADMINISTRATION MODE

Follow these steps to enter the administration mode:

1Slide the T/P switch on the left side of the console to P.

2Press Conference twice.

On the DisplayConsole, the administration menu appears. On the

BIS-34D Console, lights start flashing next to Adm Pool, Adm

Tel, Message, and Speaker.

TO LEAVE ADMINISTRATION MODE

SUMMARY OF ADMINISTRATION PROCESS

To leave administration mode, slide the T/P switch to the center position.

Following is a Iist of the procedures that make up the administration process. The procedures are listed in the order in which they are performed.

●Set system operating conditions

>Set system size

>Set system type

>Designate attendant positions

●Perform flexible numbering (FM2 and R3 only)

●Administer lines

>Assign lines to pools

>Specify toll type

>Specify Touch-Tone or rotary signaling on lines

●Administer stations

>Assign lines and line pools to stations

>ldentify analog voice terminal type

>Identify jacks for voice announcement to busy voice terminal feature

3-18 Before Administering a System