Assigning Stations Dial Access to line Pools
Use this procedure to assign stations dial access to line pools. Refer to Form 1a, System Incoming Lines for Release 3, or the System Configuration Form for Feature Module 2 for proper assignments.
With a Display Console
1Enter administration mode by sliding the T/P switch to
P.
2Press Conference twice.
The administration menu appears.
3Press [Station], [DialAcc] .
4Press the Auto Intercom button or dial the intercom number for the station you want to assign dial access.
5Press [Enter] ..
6Press the button of a line in each pool you want to
assign until your selection is shown.
Green light on = station has Dial Access to the pool containing the
line
Green light off= station does not have Dial Access to the pool
containing the line
If you want to give another station the same line assignments as one you have already set up, use the following shortcut:
CAUTION: Be aware that when you copy line assignments, you also copy call restrictions, allowed list and disallowed list permissions. Be sure you want the two stations to be identical in these respects before using this copy procedure.
a Press [Copy] .
b Press the Auto Intercom button or dial the intercom number of the station you are copying from.
