Troubleshooting for Anynet+
Problem | Possible Solution |
|
|
Anynet+ does not work. | •• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. |
| •• You can connect only one receiver (home theater). |
| •• Check if the Anynet+ device power cord is properly connected. |
| •• Check the Anynet+ device’s Video/Audio/HDMI cable connections. |
| •• Check whether Anynet+ |
| •• Check whether the remote control is Anynet+ compatible. |
| •• Anynet+ doesn’t work in certain situations. (initial setup) |
| •• If you have removed and then reconnected the HDMI cable, please make sure to search devices again or turn your product |
| off and on again. |
| •• Check if the Anynet+ function of the Anynet device is set on. |
I want to start Anynet+.
•• Check if the Anynet+ device is properly connected to the product and check if the Anynet+
•• Press the TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.
•• Select View PC in the Anynet+ menu.
•• Press the SOURCE button on the product remote control and select a non- Anynet+ device.
The message“Connecting to Anynet+ device ...”appears on the screen.
•• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
•• Use the remote control after the product has completed Anynet+ configuration or has finished switching to Anynet+.
The Anynet+ device does not play.
•• You cannot use the play function when initial setup is in progress.
82