Intel SE7501CW2 manual Troubleshooting Guide, Minimum Hardware Requirements

Intel Server Board SE7501CW2 Installation and Integration Guide

Troubleshooting Guide

In the unlikely event you do encounter issues, the troubleshooting guide will help you troubleshoot and identify possible areas of concern regarding the Intel Server Board SE7501CW2. It will also assist you in collecting the data needed to help you work through any concerns or issues that may arise The troubleshooting guide includes suggestions that may help you and a list of information that we will need to assist you should you need to call. The troubleshooting guide is available at: http://support.intel.com/support/motherboards/server/SE7501CW2/ts_guide.htm

If you are unable to resolve a problem using this guide, please follow these steps:

1.Visit http://support.intel.com/support/motherboards/server/SE7501CW2/index.htm. This Web site contains the latest information on known issues and their respective solutions. If you are still unable to resolve the issue, go to the next step.

2.Send e-mail, including as much information on the issue as possible, to Intel customer support, using the form available at this URL: http://supportmail.intel.com/scripts-emf/welcome.asp?id=37

3.Channel customers can contact Intel customer support toll free at 1-866-655-6565. Non-channel customers should use one of the numbers listed at http://www.intel.com/support/9089.htm

Minimum Hardware Requirements

Your system must meet the following minimum requirements to avoid integration difficulties and possible board damage:

•Processor: Minimum of one Intel Xeon processor 1.8 GHz with 512K cache support in a 603-pin (400-MHz FSB) or 604-pin (533-MHz FSB) INT flip-chip micro pin-grid array (INT-mPGA). For a list of tested processors, visit http://support.intel.com/support/motherboards/server/SE7501CW2/proc_supp.htm

•Memory: Minimum of one 128-MB ECC DDR 266-compliant registered SDRAM 168-pin gold DIMM. For a list of tested memory, visit http://support.intel.com/support/motherboards/server/SE7501CW2/tested_mem.htm

•Power: Minimum of 450 W with 1.2A standby current which meets the SSI EPS 12V specification. Intel provides a power budgeting tool to help you determine the power needs of your server at http://support.intel.com/support/motherboards/server/pwr_budget.htm

Additional resources and support for your server board, including tested chassis, qualified chassis components, specifications, and software updates, can be found at http://support.intel.com/support/motherboards/server/SE7501CW2/index.htm

6