Intel SE7501CW2 manual Chassis Preparation and Server Board Installation, About the I/O Shield

Intel Server Board SE7501CW2 Installation and Integration Guide

Chassis Preparation and Server Board Installation

About the I/O Shield

An ATX 2.03-compliant I/O shield is provided with your server board. The shield is required by Electromagnetic Interference (EMI) regulations. It minimizes EMI and helps obtain proper cooling of the server.

The shield fits the rectangular opening near the power supply in the back of the chassis. The shield has cutouts that match the external I/O connectors of the server board (such as the keyboard and mouse connectors).

Attaching the Gasket to the I/O Shield

1.Remove the two backing strips from the gasket.

2.Press the gasket onto the inside face of the I/O shield as shown.

Attaching the Label to the I/O Shield

1.Remove the backing from the label included with your server board.

2.Press the label onto the outside face of the I/O shield (A).

Installing the I/O Shield

Install the I/O shield from inside the chassis, with the label facing outward.

1.Insert one edge, and rotate the I/O shield into the chassis cutout.

2.Press firmly until the I/O shield clicks into place.

9