Intel Server Board SE7501CW2 Installation and Integration Guide
LANDesk* Client Manager
LANDesk* Client Manager makes it easier to manage a computer and troubleshoot common computer problems.
Use Client Manager to:
•View system inventory
•Monitor a computer's health
•Receive alerts for system events
•Remotely power off, power on, and reboot client computers
•Monitor configuration changes
Installing LANDesk Client Manager
Client Manager has two different management consoles that you can install: a client (single,
•Client: The client version enables an end user to view information and manage alerts for a local computer. This version doesn't permit a user to select and view remote computers, or power on/off other computers.
•Administrator: The administrator version enables you to manage remote client computers on the network. This means you can view information, generate reports, receive alerts, and power on/off other computers remotely. To remotely reboot, power off, or power on client computers, the administrator version must be installed on at least one computer that is attached to the network. The administrator console is not designed to be a mobile management console. The best way to manage client computers from multiple locations is to connect to your administrator console via Internet Explorer* 5.5 from various computers on your network.
Installation instructions and further information on LANDesk Client Manager are available in the documentation included on the Server Board SE7501CW2 Resource CD.
LANDesk System Requirements
To run Client Manager on your network, the administrator and client computers must comply with these system requirements.
Administrator computers
•Windows* 2000 or Windows XP for the administrator console
•64 MB of RAM for Windows 2000, 128 MB of RAM for Windows XP
Client computers
•Windows 98 Second Edition, Windows Me, Windows NT* 4.x (Service Pack 6a or later), Windows 2000, or Windows XP for the client console
•24 MB of RAM for Windows 98 Second Edition, 32 MB of RAM for Windows Me or Windows NT, 64 MB of RAM for Windows 2000, 128 MB of RAM for Windows XP
23
