Intel Server Board SE7501CW2 Installation and Integration Guide
Cable Routing – Intel Server Chassis SC5200
To ensure proper airflow within the chassis, follow the cable routing guidelines below.
IDE or SCSI Cables
Cables that connect to devices in the lower device bays should be routed around the EPAC system fan carrier as shown.
1.Route cables as shown.
2.Replace the top half of the EPAC.
Floppy and Front Panel Cables
Route the floppy drive and front panel cables as shown.
Installing the Access Cover
1.Place the cover so the tabs go into the slots on the server. The cover should be flush against the chassis.
2.Slide the cover forward until it stops.
3.Tighten the two captive screws into the rear of the chassis.
19
