AT&T 518-600-016 manual Display Console Station Shift Buttons, Jacks 31 through

TABLE 3-1 Display Console Station Shift Buttons

	Label	Selects Intercom Numbers
	Shift 1	10 through 49 (or the equivalent Flexible Numbering codes)
	Shift 2	50 through 69,700 through 719 (or the equivalent
		Flexible Numbering codes)
	Shift 3	720 through 759 (or the equivalent Flexible Numbering codes)
		If you want to select a particular voice terminal, the light
		must be on next to the shift button for the group that
		contains that voice terminal’s intercom number. If the
		light isn’t on, press the appropriate shift button before
		pressing the Auto Intercom button. For example, if you
		want to assign lines to the voice terminal represented by
		intercom nurnbe~61, press Station Shift 2. The light next
		to Station Shift 2 comes on, and the Auto Intercom
		buttons now represent intercom numbers 50 through 69
		and 700 through 719.
Line Shift Buttons		There are two line shift buttons on the Display Console for
		use during administration of systems with more than 30
		lines. If you press Line Shift 1, the line buttons represent
		the first 30 lines (the lines connected to line jacks 01
		through 30). If you press Line Shift 2, the line buttons
		represent the remaining lines (those connected to line
		jacks 31 through 56).

USING THE DISPLAY DURING ADMINISTRATION

Both administrator/attendant consoles have display screens; however, they are used differently during administration.

The Administrator/Attendant Console 3-7