SELECTING THE ANSWER SUPERVISION TIME
To select the answer supervision time for tie lines, follow these steps:
1Enter administration mode by sliding the T/P switch to P.
2Press Conference twice.
The administration menu appears.
3Press [More], [More], [More], [TieLines], [More], [More], [AnsSupv]
The answer supervision screen appears.
4Dial the line number or press the line button of a tie line, then press [Enter] .
The current setting is displayed.
5Press [Drop] remove the old setting.
NOTE: Press [Exit] if you do not want to change the
setting.
The answer supervison screen appears.
6Dial the new setting.
>time= 20 to 4800 ms (increments of 20)
>time= 300 ms (default)
NOTE: Use the backspace button to erase numbers incorrectly dialed.
7 Press [Enter] .The system will round down to the nearest increment.
The answer supervion screen appears.
8Repeat steps 4 through 7 for each tie line port.
9Press Conference to return to the main administration menu, or leave administration mode by sliding the T/P switch to the center position.
