8USING THE CAMERA
Tips before operating your camera
•You cannot activate the camera while on a call.
•Once the camera is active, the home screen acts as the viewfinder.
•If you get a “Low memory” error, check your resolution and quality compression settings. See “Setting up the camera” on this page.
•If there is no activity within 45 seconds after you turn your camera on, the camera quits and returns to the previous launch point.
•Camera settings and options can only be accessed when the camera is active.
Accessing camera and video modes
The camera can be used with the slide open or closed.
Slide closed
•Press 
until you hear one beep to activate camera mode.
•Press 
until you hear two beeps to activate video mode.
Slide open
•Press 
until you hear one beep to activate camera mode.
•Press 
until you hear two beeps to activate video mode.
Camera settings
1.Press and hold 
to activate picture mode.
–Press and hold 
to switch from Video
to Picture mode if necessary. Look for the
or 
icon at the top of the home screen.
2.Press the right softkey 
to select Options .
3.Press 
to select Settings.
4.Highlight an option and press 
:
–Flash options are On, Off, or Automatic.
–Resolution options are 640 x 480, 320 x 240 (best for sending to email), and 160 x 120.
–Low Light Mode brightens the picture for low light environments.
–Self Timer options are Off (default) or 3, 5, or 10 second pauses. When set, the camera beeps from 3 seconds down to the time the shutter snaps the picture automatically. Self Timer is not available when Multishot mode is activated.
User Guide for the Slider Sonic Phone | 27 |
