Kyocera VMKX5C manual Training voice recognition, Answering the phone, Answering automatically

2.Select Menu → Settings → Keyguard →

Disabled, then press .

To wake up the phone:

1.Say “Wake Up” and listen for a tone.

2.Say “Wake Up” again until you hear two tones.

If the phone does not recognize your “Wake up” command, see “Training voice recognition” on page 60.

Answering the phone

You can set your hands-free car kit to (1) answer automatically or (2) answer using a

voice command.

Answering automatically

You can set your phone to answer automatically.

Note: This setting also works with the portable hands-free car kit.

•Select Menu → Settings → Accessories → Call answer → After 5 seconds.

Answering using voice commands

If Auto-Answer is turned off, you can use a voice command to answer an incoming call using the installed hands-free car kit.

•Select Menu → Settings → Accessories →

Call answer → Disabled.

To activate the Voice Answer setting:

1.Select Menu → Settings → Call options → Voice answer.

2.Highlight Enabled and press . To answer a call:

When you receive an incoming call, the phone responds: “Incoming call, answer?” If the caller is recognized as a contact entry in your phone, then the phone will say “Incoming call from (Name), answer?”

• Say “Yes” or press any key except .

Ignoring an incoming call

To ignore an incoming call, do one of the following:

•Say “No” and press to silence the alert.

•Remain silent. The voice alert repeats twice and the phone rings once, then returns to the home screen.

Training voice recognition

If your phone is having trouble recognizing your voice, you can train it with the commands Yes, No, and Wake up.

1.Select Menu → Settings → Call options.

2.Select Voice training.

3.Read the message and press the left softkey

to select OK and continue. Cancel returns you to the previous screen.

4.Select Train All or the item you want to train.

5.Follow the prompts for each word until training is complete.

60 Using Voice Recognition