cPress [Enter].
dPress the Auto Intercom button or dial the intercom
number of the station you are copying to.
ePress [Enter].
You hear a
procedure is complete.
fRepeat steps a through e for each station for which you want to copy line assignments.
gPress [Exit] to return to the Stations screen.
7Press [DialAcc] and repeat steps 4 through 6 for each station to which you want to copy line assignments.
8Press Conference to return to the administration menu
or leave administration mode by sliding the T/P switch to the center position.
With a
1Enter administration mode by sliding the T/P switch to P.
2Press Conference twice.
Lights flash next to Adm Tel, Adm Pool, Message and Speaker.
3Press Adm Tel.
4Press the Auto Intercom button or dial the intercom
number for the station you want to assign dial access.
Steady green light goes on next to Adm Tel and two beeps sound.
5Press the same Auto Intercom button or dial the same intercom number from step 4.
6Press the button of a line in each pool you want to
assign until your selection is shown.
Green light on = station has dial access containing line
Green light off = station does not have dial access to pool containing line
