SELECTING THE DIALING MODE
SELECTING THE DIAL
TONE
To select the dialing mode for tie lines, follow these steps:
1Enter administration mode by sliding the T/P switch to P.
2Press Conference twice.
The administration menu appears.
3Press [More], [More], [More], [TieLines], [More], [InMode].
The in mode screen appears.
4Press the tie line button to select the dialing mode. wanted.
Green light on =
Green light off = Rotary selected.
5Press [OutMode]
The out mode screen appears.
6Perform steps 2 through 4 again, except select the dialing mode for outgoing lines.
7Press Conference to return to the main administration menu, or leave administration mode by sliding the T/P switch to the center position.
To select the dial tone for tie lines follow these steps:
1 Enter administration mode by sliding the T/P switch to P .
2 Press Conference twice.
The administration menu appears.
3Press [More], [More], [More], [TieLines], [More], [DialTone].
The dial tone screen appears.
4 Touch the tie line button to select the dial tone:
Green light on = (remote default)
Green light off = Local
5 Press Conference to return to main administration menu or leave the administration mode by sliding the T/P switch to the center position.
