AT&T 518-600-016 manual Call Pickup Automatic Line Selection

Call Pickup

Automatic Line Selection

You can use the Call Pickup feature to answer a call that is ringing, parked, or on hold anywhere in the system. To program this feature, follow these steps:

1Label a button.

2Enter programming mode by sliding the T/P switch to

P .

NOTE: Digital phones: Dial #33.

3Press the button just labeled that you want to program.

4Dial ✱ 84.

5If you want to make this an individual Call Pickup button, dial the intercom number or line number.

6Program another feature or leave programming mode by sliding the T/P switch to the center position.

NOTE: Digital phones: Dial #00.

You can use the Automatic Line Selection feature to specify the order in which the system makes outside lines available to you. To program this feature, follow these steps:

1Enter programming mode by sliding the T/P switch to

P .

NOTE: Digital phones: Dial #33.

2Dial ✱✱

3Press the line buttons in the order you prefer.

Programming Voice Terminals 3-117