AT&T 518-600-016 manual Press More, More, More, TieLines, InType

5 Press the button beneath the display to select the direction of the tie line:

>Two way (default)

>Outgoing

>Incoming

The direction screen appears.

SELECTING THE LINE TYPE

6 Repeat step 4 for each line port.

7 Press Conference to return to the main administration menu or leave administration mode by sliding the T/P switch to the center position.

To select the tie line type, follow these steps:

1Enter administration mode by sliding the T/P switch to P.

2Press Conference twice.

The administration menu appears.

3Press [More], [More], [More], [TieLines], [InType].

The in type screen appears.

4

5

Dial the line number or press the line button of a tie line, then press [Enter].

Press the button beneath the display to select the type of tie line wanted:

>Wink= wink start (default for outgoing)

>Delay= delay dial

>Imm = immediate start

>Auto= automatic ringdown (default for incoming)

The in type screen appears.

3-54 Administering a New System