AT&T 518-600-016 manual Changed

CHANGED

INTERCOM NUMBERS OR FEATURES

Symptom: Intercom numbers have changed or features assigned to a person's station have changed.

Either of these conditions can occur when a system has been readministered and the wires to the stations affected have not been connected to the jacks that reflect the latest administration.

Possible Cause	Possible Solution	To Investigate Further
1 The station is not	Check that station wiring is
connected to the correct jack.	connected to the correct jack.
	If the connections are
	incorrect plug the wires into
	the jacks as intended by the
	current administration.
	If the connections are
	correct, check the positions
	and numbering of the
	modules on the carrier. If the
	modules are not placed in the
	correct order or the intercom
	numbers do not reflect
	current administration, turn
	the power off, place the
	modules in their correct
	order, and renumber the
	intercom numbers to reflect
	current administration.
	Check your administration
	forms and readminister the
	affected stations.
	If modules are in their	If the planning forms are
	correct positions, numbered	correct go to "General Tests"
	appropriately, and connected	on page 4-55 before calling
	to the correct stations, verify	the equipment supplier.
	your planning forms.

Procedures for Specific Symptoms 4-51