3Determine whether the new location has a jack field or a direct connection to the control unit.
If you have a jack field, follow these steps:
a Locate the jumper cord with the voice terminal’s intercom number.
b Unplug it from the jack in the jack field for the voice terminal’s old location.
c Plug it into the jack in the jack field for the voice terminal's new location.
Do not change any labels in the system. Simply record the change of location in the system directory. The voice terminal keeps its original intercom number and does not require reprogramming.
If you have a direct connection from the new location
to the control unit, follow. these steps:
a Find the modular cord that terminates the wiring run from the new location to the control unit.
b At the control unit locate the jack number that identifies the voice terminal’s intercom number.
NOTE: Jack numbering differs from intercom
numbering. Jack locations run sequentially, beginning with 01, and intercom numbers run sequentially, beginning with 10.
cIf another cord is in the jack, unplug it.
dPlug the cord for the new location and intercom number into the corresponding control unit jack assigned to the voice terminal’s intercom number.
eApply a new label to the cord at the new location and on the appropriate control unit module.
fRecord the change in the system directory.
You do not have to reprogram the voice terminal.
