AT&T 518-600-016 manual Press Speaker

TABLE 3-6 BIS-34D Console Administration (continued)

Feature		Procedure: Slide T/P switch to P, press Conference
		button twice, then follow steps for feature
Call Report (continued)
To record outgoing and	1 Dial #3910 to record outgoing calls only
incoming calls
		or
		Dial #3911 to record outgoing and incoming calls.
	2	Press Message.
To get a printout of Call	1	Press Message.
Report options	2 Dial #390#900 and wait for beep.
	3	Press Message.
TO set printer to scroll to	1	Press Message.
top of page automatically.	2	Dial #399.
printer must be off and
scrolled to top of next	3	Press Message.
page
Call Restrictions	NOTE: If you do not need to dial a toll prefix (0 or 1)
To assign outward and
		to place a long distance call, perform steps 1 and 2
toll call restrictions to
		below. If you use a toll preform, just perform step 2
phones:
		below.
1 To set lines to	1	Press Speaker.
identify long distance	2	Press line buttons:
calls by area code
only		Steady green light on = toll calls detected by toll prefix
		only
		Green light off = toll calls detected by area code or toll
		prefix
	3	Press Speaker.
2 To assign call	1	Press Adm Tel.
restrictions to phones	2 Press Auto Intercom button for phone.
	3 If steady green light shows next to Adm Tel and you hear
		two beeps, go on to step 4. If not,wait for 2-beep signal or
		try again later.

3-98 Optional Features