AT&T 518-600-016 manual Administering an Upgraded System, Voice Announcement Call Restrictions

Personalized Ringing

Enable/Disable

Administering an Upgraded System

REPROGRAM VOICE TERMINALS

Use the printout of the prior system obtained at the beginning of the procedure for upgrading an existing system plus the new FM2 planning forms or the new R3 planning forms to readminister the system. See “Get a Printout of the Existing System” on page 2- 132 if the printout is not available.

Since the upgraded system has 1ost all previous memory, you will need to administer the system as though it were a new system. See, "Administering a New System" on page 3-21 for complete instructions.

Because the printout of the prior system obtained at the beginning of the procedure for upgrading an existing system does not include information on individual stations, you should use the new FM2 planning forms or the new R3 planning forms to reprogram the voice terminals in the system. In providing the new (upgraded) system planning forms, the system administrator should specifically provide the following information for voice terminals .

Lines and line pools appearing on buttons

Dial access to line pools, if that is the access method wanted

Features to be programmed on buttons BIS/HFAI settings

Ringing Options and

Idle Line Preference

Voice Announcement

Call Restrictions

3-62 Administering an Upgraded System