Canon Q T 1 0 8 5 1 V 0 1, 3301B002 warranty Click Add, Select scanner

Page 22

There should be only one device listed unless you have more than one MX860 series device connected to your network.

c Click Apply to use the MX860 as a scanner.

d Confirm that a checkmark appears next to the selected device, then click Exit.

Congratulations! You are fi nished with the setup.

Go to "Start Using Your MX860!" on page 37.

cClick Add.

Add the Printer (OS X v10.3.9)

The Printer List window will open automatically.

1Click Add

The Printer Browser window opens.

aSelect MX860 series.

bClick Add.

Select the Scanner

The Canon IJ Network Scanner Selector dialog opens.

1Select scanner

a From the pop-up menu, select Canon MX860 series Network.

b In the Network Device List pane, select the MAC address of the MX860.

22

Image 22

Contents Getting Started for Mac Users Page Contents Prepare Your MX860 Getting Started OverviewBefore Starting Check your box contents Unpack and Set UpRemove all packing materials Connect a phone or answering machine for fax setup Connect the phone line for fax setupConnect the power cord Power up Select languageWith the power on, open the paper output tray Set Up the HardwareInstall the Print Head Raise the print head lock leverUnpackage the print head Lower the print head lever until it locks into placeRemove protective cap Install the Ink TanksUnwrap the first ink tank Insert the ink tank into the print headPress the OK button Load PaperClose the cover Remove the cassetteConfirm paper stack does not exceed the limit Align the Print HeadSlide the guides to match the paper size Slide the cassette back in until it clicks into placeSelect best pattern Look at the first printoutPress OK again to print the third pattern Set Up to Receive Faxes Set Up Your Fax Sender Information Set Up the SoftwareInstall the Software Insert the Setup disc Click Easy Install Double-click the Setup icon on your screenClick Restart Click OKConnect to Your Network optional Choose Your Network TypeSelect printer to use Wireless Networks with a Single Access PointMake sure the MX860 is ready Complete the network setup Select your wireless networkClick Next Select the printer Review resultsClick Add Add the printer Click Add Select scannerWireless Networks with Multiple Airport Access Points Enter network name If settings are correct, click FinishClick Next Enter your network passphrase, then click Next Review results Add the Printer OS X Click Apply to use the MX860 as a scanner Wired Networks Set the Network Connection TypeCheck Wired LAN Connection reminder appears Click Yes to close the Check Wired LAN Connection reminder Connect the Ethernet cableDisconnect the USB cable, then click OK Add the Printer OS X Add the Printer OS X Connecting Additional Computers Click Cancel Printer Browser window opens. a Select MX860 series Select the Scanner Solution Menu Start Using Your MX860On-Screen Manual Getting Help from Canon