Canon Q T 1 0 8 5 1 V 0 1 Install the Ink Tanks, Unwrap the first ink tank, Remove protective cap

Page 10

Install the Ink Tanks

1Unwrap the first ink tank

Pull the orange tape off to remove the protective wrap.

2Remove protective cap

Hold the ink tank as shown, and twist the cap off.

Do not grip the tank with force or hold the tank on the sides to avoid squeezing ink from the tank.

3Insert the ink tank into the print head

a Slide the ink tank into the matching color slot.

bPress the PUSH mark until it clicks into place.

ink light will turn red

Take care to match the inks with the labels in the print head.

4Repeat steps 1–3 until all remaining ink tanks are in place and all ink lights are red.

10

Image 10

Contents Getting Started for Mac Users Page Contents Prepare Your MX860 Getting Started OverviewBefore Starting Check your box contents Unpack and Set UpRemove all packing materials Connect a phone or answering machine for fax setup Connect the phone line for fax setupConnect the power cord Power up Select languageWith the power on, open the paper output tray Set Up the HardwareInstall the Print Head Raise the print head lock leverUnpackage the print head Lower the print head lever until it locks into placeRemove protective cap Install the Ink TanksUnwrap the first ink tank Insert the ink tank into the print headPress the OK button Load PaperClose the cover Remove the cassetteConfirm paper stack does not exceed the limit Align the Print HeadSlide the guides to match the paper size Slide the cassette back in until it clicks into placeSelect best pattern Look at the first printoutPress OK again to print the third pattern Set Up to Receive Faxes Set Up Your Fax Sender Information Set Up the SoftwareInstall the Software Insert the Setup disc Click Easy Install Double-click the Setup icon on your screenClick Restart Click OKConnect to Your Network optional Choose Your Network TypeSelect printer to use Wireless Networks with a Single Access PointMake sure the MX860 is ready Complete the network setup Select your wireless networkClick Next Select the printer Review resultsClick Add Add the printer Click Add Select scannerWireless Networks with Multiple Airport Access Points Enter network name If settings are correct, click FinishClick Next Enter your network passphrase, then click Next Review results Add the Printer OS X Click Apply to use the MX860 as a scanner Wired Networks Set the Network Connection TypeCheck Wired LAN Connection reminder appears Click Yes to close the Check Wired LAN Connection reminder Connect the Ethernet cableDisconnect the USB cable, then click OK Add the Printer OS X Add the Printer OS X Connecting Additional Computers Click Cancel Printer Browser window opens. a Select MX860 series Select the Scanner Solution Menu Start Using Your MX860On-Screen Manual Getting Help from Canon