Canon W7200, W7250 manual No Printhead, Check Printhead, Memory Overflow, No Media, Media Too Large

No Printhead

Problem 1: The printhead is not installed.

Solution: Install the printhead correctly. (Æ P.6-18)

Check Printhead

Problem 1: The printhead is not installed.

Solution: Install the printhead correctly. (Æ P.6-18)

Problem 2: The printhead installed cannot be used with this printer.

Solution: Install the printhead for this printer. (Æ P.6-18)

Memory Overflow

Problem 1: Print job cannot be processed due to the large amount of data.

Solution: Check and lower the resolution and quality settings in the printer driver.

Solution: Use the banner printing feature to divide the job.

No Media

Problem 1: The media in the selected source has run out.

Solution: Load the media then press the Online button. (Æ P.2-7, P.2-18)

Media Too Large

Problem 1: The loaded media is larger than any media size allowed for loading in the printer.

Solution: Set the correct size media then try again. (Æ P.2-7, P.2-18)

Media Skewed

Problem 1: The loaded media is skewed.

Solution: If roll media is in use, open the upper cover, raise the paper release lever, open the roll media tray, take-up some of the media manually to correct the skew then try again. (Æ P.2-7)

Solution: If a cut sheet is in use, open the upper cover, raise the paper release lever, remove the cut sheet, set it again then retry. (Æ P.2-18)

7-16

Troubleshooting