Belkin P74393UK manual Information, FCC Statement

Page 38

Information

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR

ELECTROMAGNETIC COMPATIBILITY

We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product,

F1UP0301

to which this declaration relates,

complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Exposure to Radio Frequency Radiation.

The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such manner that the potential for human contact normal operation is minimized.

When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the distance between the equipment and the receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

1

2

3

4

5

6

7

8

9

10

section

35

Image 38
Contents Port USB Print Server Wired Table of Contents Advantages of a wireless network IntroductionIntroduction Wireless Networking SpeedWireless Comparison Advantages of a wired network Combining wired and wireless technologiesPlacement of your Wireless Networking Hardware Introduction Overview LAN LED Knowing your Print Server PowerLEDError Status LEDPrinter 1/Printer Reset/Test Button 3 functionsOverview Connecting the Print Server Using the Setup Wizard Connecting the Print Server Using the Setup Wizard Set Up Print Server Setup for Advanced UsersInstall Print Drivers Setup for Advanced Users Configure Computers to Print to the Print Server Setup for Advanced Users Web Configuration Accessing the Web Configuration MenusWeb Configuration Web Interface HomeWeb Interface Login Screen Web Interface IP AddressWeb Interface Print Server Configuration Web Interface Upgrade FirmwareWeb Interface System Settings Changing Password Printing to Multiple Print Servers Section Printing to Multiple Print Servers Belkin Port Monitor Advanced Menu Opening the Belkin Port Monitor Advanced MenuBelkin Port Monitor Advanced Menu Click the Advanced tab Using the Print Server for FTP Printing Section Using the Print Server for FTP Printing Section Troubleshooting Cannot find Print ServerSection Troubleshooting Installation CD-ROM does not start Setup Utility Technical Support Europe 00 800 223 55 Australia 1800 666Information FCC StatementInformation ModificationsSection