APC 2000, 900, 1250 user manual Enable UPS

Page 18

4.0 Installation

4.4 Connect UPS to service and enable - continued

■220/230/240 Vac versions

The 220/230/240 Vac version UPS is not furnished with an input line cord. Instead, two output cords are supplied. However, in most installations it will not be necessary to purchase a UPS input power cord. Simply swap the line cords from your equipment with the furnished output cords. Plug in the UPS using one of the swapped out equipment cords. The UPS's input cord must be three conductor, each 1.0 mm2, rated to 10 Amps.

In the event your equipment does not have a removable line cord, the provided rewireable plug may be installed on the line cord. Additional output cords and adapter plugs are available from your dealer and from the factory.

The UPS may be configured to operate where 240 Vac, 50 Hz service is provided. When Option switch 2 is set to the on position, the UPS's transfer and on-battery output voltages are adjusted for proper operation on 240 Vac service. See section 5.6.

4.4.2 Enable UPS

Move the UPS Enable switch to the on ( I ) position. When shipped, this switch is in the off position to prevent accidental activation of the UPS. The batteries will not appreciably dis- charge if this switch is left on.

Allow the UPS to charge its battery for at least 8 hours before use. The UPS recharges its battery whenever the utility voltage is normal and UPS Enable switch is ON. While the UPS was shipped from the factory with the batteries in a fully charged state, the batteries may lose some charge during shipping and storage. You may use the UPS immediately without charging, but the Low Battery indicator may illuminate and the UPS may have reduced backup time until the battery has had an opportunity to charge.

Page16

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Smart-UPS Important safety instructions Radio Frequency InterferenceTable of contents Introduction OverviewRemote interfaces Battery replacement indicators and testSmartBoost Extended capabilitiesSafety EnglishSécurité Sicherheit Deutsch¡ Seguridad Front view Presentation900VA and 1250VA models 100, 120 Vac versions Rear view900VA and 1250VA models 220/230/240 Vac version 2000VA model 100, 120 Vac versions Front view Rear view2000VA model 120 Vac versions options Option2000VA model 208 Vac version and options Standard Option2000VA model 220/230/240 Vac version Installation PlacementReceiving inspection Connect battery pack 2000VA model only Connect UPS to service and enableConnect UPS to service Enable UPS Switch on the UPS Check Site Wiring Fault indicator 100, 120 Vac versionsSwitch on load equipment Plug loads into UPSDisplay features OperationBattery capacity bar graph Output power bar graphLow battery Audible alarmOn-battery operation Line voltage bar graphOption switch Option switchesReplace battery OverloadPage22 Status reporting MonitoringPower management Operation customizingPage25 PowerChute Software UPS MonitoringInterface Kits Computer interface port Difficulty Difficulté Schwierigkeit Dificultad Troubleshooting chart GifOcSd GfkkWOcS PNmkS NPlWfe lf lNbSBattery replacement check Obtaining Service Storing the UPS Storage conditionsExtended storage Output characteristics SpecificationsTransfer characteristics InputEnvironment Battery and chargerNoise and surge suppression PhysicalTypical run time versus load Cy˜ E66nN 78A6nN 8666nN ¡y ¡¸ y˜ 64C 3y I oyPage39 Declaration of Conformity Limited Warranty Life support policy∗ Mailing

900, 1250, 2000 specifications

The APC series, particularly models 2000, 1250, and 900, represents a cornerstone in the uninterruptible power supply (UPS) landscape, providing robust solutions for protecting sensitive electrical equipment from power disruptions. These models are designed to ensure high availability and power reliability for a range of applications, from personal use to larger enterprise systems.

The APC 2000 is known for its high power capacity, rated at 2000VA/1600W. It features an advanced LCD interface that provides essential information, such as battery status and load capacity. This model incorporates pure sine wave output, making it ideal for devices that require a stable and clean power source. It also offers multiple outlets and communication ports, including USB and SmartSlot for additional network management capabilities. The integration of PowerChute software allows users to efficiently monitor and manage the UPS, ensuring proactive response to any power-related issues.

The APC 1250, with a capacity of 1250VA/750W, is tailored for medium-sized setups. Its compact design makes it suitable for small offices and home workstations. The model boasts similar features to the 2000, including an intuitive LCD display and pure sine wave output. The APC 1250 also provides automatic voltage regulation, ensuring that connected devices receive consistent voltage without unnecessary battery usage. The unit’s design prioritizes user-friendliness with tools for easy installation and monitoring.

Meanwhile, the APC 900 operates at 900VA/480W, catering specifically to individual users and smaller electronics. This model is designed for basic use, such as providing backup power for personal computers, networking equipment, or smaller electronics. The APC 900’s standout features include user-friendly status indicators, fuse protection, and several outlets to ensure multiple devices can be connected simultaneously. Its compact size makes it particularly appealing for home environments where space is at a premium.

Each of these models leverages cutting-edge technologies including advanced battery management systems that prolong battery life and performance. They incorporate surge protection and noise filtering to safeguard sensitive equipment. In terms of physical characteristics, the UPS units are built with a focus on durability and ease of transport, featuring sturdy casings and integrated handles.

In conclusion, the APC 2000, 1250, and 900 models offer a range of features that cater to diverse power needs, ensuring reliable power protection and management for both personal and business applications. Their deployment of advanced technologies and user-friendly functionalities make them a preferred choice in the UPS market.
Top Page Image Contents