APC 1250, 2000, 900 Specifications, Input, Transfer characteristics, Output characteristics

Page 38

9.0 Specifications

Note: Where specifications ratings differ, values for the 100 Vac version are given in { } brackets, values for 208 Vac versions are given in ( ) brackets, and values for 220/230/240 Vac versions are given in [ ] brackets.

9.1 Input

Nominal input voltage: single phase, {100 Vac}, 120 Vac, (208 Vac), [220/230/240 Vac].

Nominal input frequency: 50 or 60 Hz, internally selected by microprocessor.

Input protection, 900VA model: {14Amp}, 14Amp, [12Amp] resettable circuit breaker.

Input protection, 1250VA model:{15Amp}, 14Amp, [12Amp] resettable circuit breaker.

Input protection, 2000VA model: (14 Amp), [15 Amp] resettable circuit breaker.

9.2 Transfer characteristics

Frequency limits for on-line operation: 50 or 60 Hz, ±5%.

Lower input voltage limit for on-line operation: {80 Vac}, 90 Vac, (150 Vac ), [173 Vac; when set for operation at the nominal 240 Vac line, the lower input voltage limit is increased to 180 Vac].

Upper input voltage limit for on-line operation: {110 Vac}, 132 Vac, (224 Vac), [253 Vac; when set for operation at the nominal 240 Vac line, the upper input voltage limit is increased to 264 Vac].

SmartBoost operation input voltage range: {80 to 90 Vac}, 90 to 103 Vac, (150 to 172 Vac), [173 to 196 Vac; when set for operation at the nominal 240 Vac line, the SmartBoost input voltage range is increased to 180 to 204 Vac].

Transfer time: 2 ms typical, 4 ms maximum. Note that 1 ms is 0.001 seconds.

9.3 Output characteristics

Maximum load, 900VA model: 900 VA or 630 W @ 0.70 power factor.

Maximum load, 1250VA model: 1250 VA or 900 W @ 0.72 power factor.

Maximum load, 2000VA model - 100, 120 Vac versions: 2000 VAor 1500 W @ 0.75 power factor with supplied NEMA L5-30P installed; 1850 VA or 1500 W @ 0.81 power factor with supplied NEMA 5-20P installed; 1440 VA or 1440 W as supplied. See section 3.0 for maximum load ratings of models with wiring device options.

Maximum load, 2000VA model - 208, 220/230/240 Vac versions: 2000 VA or 1500 W @ 0.75 power factor.

On-battery output voltage: {100 Vac}, 115 Vac, (208 Vac), [225 Vac] ±5%. The 220/230/ 240 Vac version may be set to provide a nominal 240 Vac, see section 5.0.

On-battery frequency: 50 or 60 Hz, ±0.1 Hz unless synchronized to mains frequency during utility brownout.

On-battery waveshape: low distortion sinewave.

Protection: overcurrent and short circuit protected, latching shutdown upon overload.

Page36

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Smart-UPS Important safety instructions Radio Frequency InterferenceTable of contents Introduction OverviewRemote interfaces Battery replacement indicators and testSmartBoost Extended capabilitiesSafety EnglishSécurité Sicherheit Deutsch¡ Seguridad Front view Presentation900VA and 1250VA models 100, 120 Vac versions Rear view900VA and 1250VA models 220/230/240 Vac version 2000VA model 100, 120 Vac versions Front view Rear view2000VA model 120 Vac versions options Option2000VA model 208 Vac version and options Standard Option2000VA model 220/230/240 Vac version Receiving inspection InstallationPlacement Connect UPS to service Connect battery pack 2000VA model onlyConnect UPS to service and enable Enable UPS Switch on the UPS Check Site Wiring Fault indicator 100, 120 Vac versionsSwitch on load equipment Plug loads into UPSDisplay features OperationBattery capacity bar graph Output power bar graphLow battery Audible alarmOn-battery operation Line voltage bar graphOption switch Option switchesReplace battery OverloadPage22 Status reporting MonitoringPower management Operation customizingPage25 Interface Kits PowerChute SoftwareUPS Monitoring Computer interface port Difficulty Difficulté Schwierigkeit Dificultad Troubleshooting chart GifOcSd GfkkWOcS PNmkS NPlWfe lf lNbSBattery replacement check Obtaining Service Extended storage Storing the UPSStorage conditions Output characteristics SpecificationsTransfer characteristics InputEnvironment Battery and chargerNoise and surge suppression PhysicalTypical run time versus load Cy˜ E66nN 78A6nN 8666nN ¡y ¡¸ y˜ 64C 3y I oyPage39 Declaration of Conformity Limited Warranty Life support policy∗ Mailing

900, 1250, 2000 specifications

The APC series, particularly models 2000, 1250, and 900, represents a cornerstone in the uninterruptible power supply (UPS) landscape, providing robust solutions for protecting sensitive electrical equipment from power disruptions. These models are designed to ensure high availability and power reliability for a range of applications, from personal use to larger enterprise systems.

The APC 2000 is known for its high power capacity, rated at 2000VA/1600W. It features an advanced LCD interface that provides essential information, such as battery status and load capacity. This model incorporates pure sine wave output, making it ideal for devices that require a stable and clean power source. It also offers multiple outlets and communication ports, including USB and SmartSlot for additional network management capabilities. The integration of PowerChute software allows users to efficiently monitor and manage the UPS, ensuring proactive response to any power-related issues.

The APC 1250, with a capacity of 1250VA/750W, is tailored for medium-sized setups. Its compact design makes it suitable for small offices and home workstations. The model boasts similar features to the 2000, including an intuitive LCD display and pure sine wave output. The APC 1250 also provides automatic voltage regulation, ensuring that connected devices receive consistent voltage without unnecessary battery usage. The unit’s design prioritizes user-friendliness with tools for easy installation and monitoring.

Meanwhile, the APC 900 operates at 900VA/480W, catering specifically to individual users and smaller electronics. This model is designed for basic use, such as providing backup power for personal computers, networking equipment, or smaller electronics. The APC 900’s standout features include user-friendly status indicators, fuse protection, and several outlets to ensure multiple devices can be connected simultaneously. Its compact size makes it particularly appealing for home environments where space is at a premium.

Each of these models leverages cutting-edge technologies including advanced battery management systems that prolong battery life and performance. They incorporate surge protection and noise filtering to safeguard sensitive equipment. In terms of physical characteristics, the UPS units are built with a focus on durability and ease of transport, featuring sturdy casings and integrated handles.

In conclusion, the APC 2000, 1250, and 900 models offer a range of features that cater to diverse power needs, ensuring reliable power protection and management for both personal and business applications. Their deployment of advanced technologies and user-friendly functionalities make them a preferred choice in the UPS market.
Top Page Image Contents