Axis Communications NPS 532, NPS 530 user manual Section Setup for NetWare

Page 14

Section 3: Setup for NetWare

Section 3

Setup for NetWare

Before you begin:

The NPS 530/532 can run in either Print Server Mode, Remote Printer Mode or both simultaneously. The basic configuration is done using the PCONSOLE software supplied from Novell, and if you choose a setup other than the automatic print server mode, also with AXCFG supplied with the NPS 530/532.

The overview on the following pages explains the advantages and limitations of each mode. Select the mode that best fits your needs, then carry out the configuration as described later in this section.

•Make sure that the NPS 530/532 is powered on and attached to the network.

•You will need root privileges on the system.

•Have the serial number found on the back of the NPS 530/532 available.

•Any network configuration should always involve the network manager.

•If you use NetWare 4.0 or later, you must set up your file server for bindery emulation by specifying the Bindery Context parameter. See your Novell documentation for details.

Before configuring your NetWare system, you may want to configure the NPS 530/532 (e.g. logical printer definitions). This is done using the AXCFG software on the disk supplied with the NPS 530/532.

On the disk you will find a text file called read.me, containing installation instructions for AXCFG in the Novell environment.

14

Axis NPS 530/532 User’s Manual

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Preface About AxisAbout this manual Emission notices Trademark acknowledgementsTable of contents Setup for Macintosh Section Introduction Where To Use it How It WorksPrint Server Mode and Remote Printer Mode Main Features Delivery AccessoriesSection Getting started Front Printer Installation Before you beginNetwork Installation Section Setup for NetWare Advantages Limitations Simplifies the queue and printer set-up Press Escape to return to the Main Menu Print Server Mode AutomaticPress Insert to add a new Print Server Select Queue Servers 3.xx or Print Servers Print Server Mode Parameter ControlledQueue to Print Server Press Insert to display the Queue Server Candidates listSelect Netware Menu Select Save, then select Cancel until Axcfg closes downStart AXCFG, and select NetWare Print Server Mode File Server Controlled Select Queues Serviced By Printer, then select Printer Select AXISnnnnnnSelect Serviced NetWare Servers Example Use Kilroy as configuration file server Press Insert to add a new queue Remote Printer ModeSelect Print Queue Information 3.xx or Print Queues Press Esc to return to the Main MenuSelect the first free slot in the Configured Printers list Press Esc to get back to the Main Menu, then exit PconsoleSelect AXISnnnnnn!n Example Use printer 0 at Bilbonlm as remote printer Verify the Communication Section Setup for Windows Windows for Workgroups Windows NTWindows Windows for Workgroups ExamplePrinting Server setupClient setup Select NetworkWindows Server setup Windows NT Close the Print ManagerOpen Print Manager Windows NT LPD printing Select TCP/IP Protocol and Related Components, then click OKActivate the NetBEUI protocol if not already activated Section Setup for OS/2Install the Axis Print Utility for OS/2 LAN Server Install the Axis Print Utility for OS/2Activate the NetBEUI Protocol LAN ManagerInstall the NPS 530/532 Create a Print Queue Sharing Print Queues NET Copy file name \\server name\queue name Set up and attach a print queue at your Unix workstation Section Setup for Unix systemsSet up the NPS 530/532 as a TCP/IP node Prepare your system for a new TCP/IP nodeFind an unused IP address CommandsPrepare your system Set up your NPS 530/532 Arp -s host name node address temp ping host name IBM AIX Systems00408C110086 salesdept Example Set up and attach a print queue BOS Bull DPXFtp salesdept Connected to salesdept Print methods Section Setup for Macintosh Choose a Printer Verify the Communication Section Advanced Options Logical Printers LPT1Advanced Options Character Set Conversion Strings Before and After Print Jobs String Substitutions PostScript Functions Mm top margin Hex Dump Mode Telnet Login Telnet salesdept TryingAccounting Root accountStatus Logging PassLocally Administrated Address Snmp Appendix a Parameter list NetWare, Windows, OS/2Unix TCP/IP Apple EtherTalkFactory Default Settings Config File Net Mask e.g .255.255.0 for class C, 0.0.0.0 for auto-senseNetWare Protocol Enabled Binary APRINT1 PRINTER4 Menu PR4WAIT. YES PRINTER8 Menu PR8WAIT. YES Appendix B Internal printouts Upgrading Procedures Appendix C Protocol Support UpgradesOrdering Procedures Upgrade using Axcfg Upgrade using TCP/IP Verify the Upgrade Appendix D Technical specifications Network environmentsUnix features Appendix E How to contact Axis Axis on-line serviceAxis Communications Inc Axis officesAxis Communications AB Axis Communications KKIndex CapturePros

NPS 532, NPS 530 specifications

Axis Communications, known for its innovative network video solutions, has recently introduced its new line of network power supplies, the NPS 530 and NPS 532. These robust devices are designed to meet the increasing power demands of network cameras, ensuring reliable and efficient operation in various surveillance applications.

The Axis NPS 530 and NPS 532 power supplies are engineered for optimal performance in network video installations. One of their main features is their high power output. The NPS 530 provides up to 60 W, while the NPS 532 delivers up to 120 W of power, making them suitable for powering multiple network devices simultaneously. This high power capability allows for the use of more advanced cameras equipped with enhanced features, such as pan-tilt-zoom (PTZ) functionality, which can require significantly more power.

Both models are equipped with Power over Ethernet (PoE) technology, which simplifies installation and reduces the need for additional wiring. PoE enables a single cable to provide both data connection and electrical power to devices, making the installation process more efficient and cost-effective. The NPS 530 and NPS 532 support the IEEE 802.3at and 802.3af PoE standards, ensuring compatibility with a wide range of network devices.

Another key characteristic of these power supplies is their resilience and reliability. The rugged design of the NPS series ensures durability in various environmental conditions, making them suitable for both indoor and outdoor installations. They are constructed with high-quality components that enhance their longevity, reducing the total cost of ownership over time.

The NPS 530 and NPS 532 also feature advanced thermal management systems. These systems help maintain optimal operating temperatures, preventing overheating during prolonged usage. Additionally, both models include LED indicators that provide real-time status updates, allowing users to monitor the operational state at a glance.

In conclusion, the Axis NPS 530 and NPS 532 power supplies stand out in the market for their high performance, advanced PoE technology, and robust design. They offer an ideal solution for modern surveillance needs, ensuring security professionals can deploy powerful network cameras with confidence. With these innovations, Axis Communications continues to set the standard in reliable video surveillance technology.
Top Page Image Contents