Axis Communications NPS 530, NPS 532 user manual Config File

Page 73

Appendix A: The parameter list

The Config File

The remainder of this appendix contains the complete NPS 530/532 parameter list. The left column shows the parameters and their default values as they appear in the config file, and the right column contains brief descriptions of the parameters. For a full description of the parameters, please refer to the NPS Print Server Technical Reference.

---CONFIG MENU

NODE_ADDR. : 00 40 8C 11 00 86

ROOT_PWD. : pass

USERS. :

--- TCP/IP MENU

 

 

TCP_ENB.

: YES

INT_ADDR.

:

192 36 253 80

DEF_ROUT.

:

0

0 0 0

NET_MASK.

:

0

0 0 0

TCP_KEY.

:

 

 

PROS_PWD.

: netprinter

PROS_PRT.

:

35

 

LPD_BANN.

:

YES

BOOTP_ENB.

:

YES

RARP_ENB.

:

YES

RTN_OPT.

:

YES

RTEL_PR1.

:

0

 

RTEL_PR2.

:

0

 

RTEL_PR3.

:

0

 

RTEL_PR4.

:

0

 

RTEL_PR5.

:

0

 

RTEL_PR6.

:

0

 

RTEL_PR7.

:

0

 

RTEL_PR8.

:

0

 

--- SNMP

MENU

 

 

READ_COM.

: public

WRT_COM.

: pass

TRAPADDR.

:

0

0 0 0

TRAP_COM.

: public

SYS_CONT.

:

 

 

SYS_NAME.

:

 

 

SYS_LOC.

:

 

 

SNMP_AUT.

: DISABLED

TRAP_PRT.

: DISABLED

Node Address

Root Password

User Authority and Printer Access

TCP/IP Protocol Enabled

Internet Address

Default Router Address (0.0.0.0 for no router)

Net Mask (e.g. 255.255.255.0 for class C, 0.0.0.0 for auto-sense)

TCP/IP Protocol Key

PROS Protocol Password

PROS TCP Port Number

LPD Banner Page Enabled

BOOTP Protocol Enabled

RARP Protocol Enabled

Reverse Telnet Options Enabled

PR1 Reverse Telnet TCP Port Number (0 for Disabled)

PR2 Reverse Telnet TCP Port Number (0 for Disabled)

PR3 Reverse Telnet TCP Port Number (0 for Disabled)

PR4 Reverse Telnet TCP Port Number (0 for Disabled)

PR5 Reverse Telnet TCP Port Number (0 for Disabled)

PR6 Reverse Telnet TCP Port Number (0 for Disabled)

PR7 Reverse Telnet TCP Port Number (0 for Disabled)

PR8 Reverse Telnet TCP Port Number (0 for Disabled)

Read-Only Community Name

Read-Write Community Name

SNMP Trap Internet Address

SNMP Trap Community Name

System Contact

System Name

System Location

Authentication Failure Traps

Printer Traps

Axis NPS 530/532 User’s Manual

73

Page 72 Page 74
Image 73
Page 72 Page 74
Contents About Axis PrefaceAbout this manual Trademark acknowledgements Emission noticesTable of contents Setup for Macintosh Section Introduction How It Works Where To Use itPrint Server Mode and Remote Printer Mode Main Features Section Getting started AccessoriesDelivery Front Before you begin Printer InstallationNetwork Installation Section Setup for NetWare Advantages Limitations Simplifies the queue and printer set-up Press Insert to add a new Print Server Print Server Mode AutomaticPress Escape to return to the Main Menu Queue to Print Server Print Server Mode Parameter ControlledSelect Queue Servers 3.xx or Print Servers Press Insert to display the Queue Server Candidates listStart AXCFG, and select NetWare Select Save, then select Cancel until Axcfg closes downSelect Netware Menu Print Server Mode File Server Controlled Select AXISnnnnnn Select Queues Serviced By Printer, then select PrinterSelect Serviced NetWare Servers Example Use Kilroy as configuration file server Select Print Queue Information 3.xx or Print Queues Remote Printer ModePress Insert to add a new queue Press Esc to return to the Main MenuPress Esc to get back to the Main Menu, then exit Pconsole Select the first free slot in the Configured Printers listSelect AXISnnnnnn!n Example Use printer 0 at Bilbonlm as remote printer Verify the Communication Windows for Workgroups Windows NT Section Setup for WindowsWindows Example Windows for WorkgroupsClient setup Server setupPrinting Select NetworkWindows Server setup Close the Print Manager Windows NTOpen Print Manager Select TCP/IP Protocol and Related Components, then click OK Windows NT LPD printingInstall the Axis Print Utility for OS/2 Section Setup for OS/2Activate the NetBEUI protocol if not already activated Activate the NetBEUI Protocol Install the Axis Print Utility for OS/2LAN Server LAN ManagerInstall the NPS 530/532 Create a Print Queue Sharing Print Queues NET Copy file name \\server name\queue name Set up the NPS 530/532 as a TCP/IP node Section Setup for Unix systemsSet up and attach a print queue at your Unix workstation Prepare your system for a new TCP/IP nodePrepare your system CommandsFind an unused IP address Set up your NPS 530/532 IBM AIX Systems Arp -s host name node address temp ping host name00408C110086 salesdept Example BOS Bull DPX Set up and attach a print queueFtp salesdept Connected to salesdept Print methods Section Setup for Macintosh Choose a Printer Verify the Communication Section Advanced Options LPT1 Logical PrintersAdvanced Options Character Set Conversion Strings Before and After Print Jobs String Substitutions PostScript Functions Mm top margin Hex Dump Mode Telnet salesdept Trying Telnet LoginRoot account AccountingPass Status LoggingLocally Administrated Address Snmp NetWare, Windows, OS/2 Appendix a Parameter listApple EtherTalk Unix TCP/IPFactory Default Settings Net Mask e.g .255.255.0 for class C, 0.0.0.0 for auto-sense Config FileNetWare Protocol Enabled Binary APRINT1 PRINTER4 Menu PR4WAIT. YES PRINTER8 Menu PR8WAIT. YES Appendix B Internal printouts Ordering Procedures Appendix C Protocol Support UpgradesUpgrading Procedures Upgrade using Axcfg Upgrade using TCP/IP Verify the Upgrade Network environments Appendix D Technical specificationsUnix features Axis on-line service Appendix E How to contact AxisAxis Communications AB Axis officesAxis Communications Inc Axis Communications KKCapture IndexPros

NPS 532, NPS 530 specifications

Axis Communications, known for its innovative network video solutions, has recently introduced its new line of network power supplies, the NPS 530 and NPS 532. These robust devices are designed to meet the increasing power demands of network cameras, ensuring reliable and efficient operation in various surveillance applications.

The Axis NPS 530 and NPS 532 power supplies are engineered for optimal performance in network video installations. One of their main features is their high power output. The NPS 530 provides up to 60 W, while the NPS 532 delivers up to 120 W of power, making them suitable for powering multiple network devices simultaneously. This high power capability allows for the use of more advanced cameras equipped with enhanced features, such as pan-tilt-zoom (PTZ) functionality, which can require significantly more power.

Both models are equipped with Power over Ethernet (PoE) technology, which simplifies installation and reduces the need for additional wiring. PoE enables a single cable to provide both data connection and electrical power to devices, making the installation process more efficient and cost-effective. The NPS 530 and NPS 532 support the IEEE 802.3at and 802.3af PoE standards, ensuring compatibility with a wide range of network devices.

Another key characteristic of these power supplies is their resilience and reliability. The rugged design of the NPS series ensures durability in various environmental conditions, making them suitable for both indoor and outdoor installations. They are constructed with high-quality components that enhance their longevity, reducing the total cost of ownership over time.

The NPS 530 and NPS 532 also feature advanced thermal management systems. These systems help maintain optimal operating temperatures, preventing overheating during prolonged usage. Additionally, both models include LED indicators that provide real-time status updates, allowing users to monitor the operational state at a glance.

In conclusion, the Axis NPS 530 and NPS 532 power supplies stand out in the market for their high performance, advanced PoE technology, and robust design. They offer an ideal solution for modern surveillance needs, ensuring security professionals can deploy powerful network cameras with confidence. With these innovations, Axis Communications continues to set the standard in reliable video surveillance technology.
Top Page Image Contents