Axis Communications NPS 530, NPS 532 user manual Verify the Communication

Page 55

Section 7: Setup for Macintosh

LaserWriter 8.0 Open the Chooser window by clicking Chooser in the Apple menu. Fol- Printer Driver low these steps to choose a printer:

1.Click the LaserWriter 8.0 icon.

2.If your network has more than one zone, click on the zone you want. If your network has no zones, this box does not appear.

3.Click the name of the printer you want. The default NPS 530/532 printer name is shown as AXIS<nnnnnn>, where <nnnnnn> is the last six digits of the NPS 530/532 serial number.

Example: AXIS110086

4.Click the ‘Setup...’ button, and then the ‘Select PPD...’ button.

5.Choose the PPD file matching your printer, and click ‘OK’. If your printer doesn’t appear in the PPD file list, contact your printer ven- dor. You may also use the Generic PPD if you don’t need any printer specific features.

6.Click ‘OK’, and then click the close box. This completes the configu- ration and closes the Chooser.

Repeat this procedure for each Macintosh using the NPS 530/532.

Verify the Communication

To verify communication by making a test printout, just print a docu- ment from the desktop or from within a program. The printout will appear on the printer you have chosen.

You have completed the basic installation and the NPS 530/532 is ready to use as a print server.

Note: For information on advanced EtherTalk functions such as non-PostScript printer support, please refer to the AXIS NPS Print Server Technical Ref- erence.

Axis NPS 530/532 User’s Manual

55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents About Axis PrefaceAbout this manual Trademark acknowledgements Emission noticesTable of contents Setup for Macintosh Section Introduction How It Works Where To Use itPrint Server Mode and Remote Printer Mode Main Features Section Getting started AccessoriesDelivery Front Before you begin Printer InstallationNetwork Installation Section Setup for NetWare Advantages Limitations Simplifies the queue and printer set-up Press Insert to add a new Print Server Print Server Mode AutomaticPress Escape to return to the Main Menu Press Insert to display the Queue Server Candidates list Print Server Mode Parameter ControlledQueue to Print Server Select Queue Servers 3.xx or Print ServersStart AXCFG, and select NetWare Select Save, then select Cancel until Axcfg closes downSelect Netware Menu Print Server Mode File Server Controlled Select AXISnnnnnn Select Queues Serviced By Printer, then select PrinterSelect Serviced NetWare Servers Example Use Kilroy as configuration file server Press Esc to return to the Main Menu Remote Printer ModeSelect Print Queue Information 3.xx or Print Queues Press Insert to add a new queuePress Esc to get back to the Main Menu, then exit Pconsole Select the first free slot in the Configured Printers listSelect AXISnnnnnn!n Example Use printer 0 at Bilbonlm as remote printer Verify the Communication Windows for Workgroups Windows NT Section Setup for WindowsWindows Example Windows for WorkgroupsSelect Network Server setupClient setup PrintingWindows Server setup Close the Print Manager Windows NTOpen Print Manager Select TCP/IP Protocol and Related Components, then click OK Windows NT LPD printingInstall the Axis Print Utility for OS/2 Section Setup for OS/2Activate the NetBEUI protocol if not already activated LAN Manager Install the Axis Print Utility for OS/2Activate the NetBEUI Protocol LAN ServerInstall the NPS 530/532 Create a Print Queue Sharing Print Queues NET Copy file name \\server name\queue name Prepare your system for a new TCP/IP node Section Setup for Unix systemsSet up the NPS 530/532 as a TCP/IP node Set up and attach a print queue at your Unix workstationPrepare your system CommandsFind an unused IP address Set up your NPS 530/532 IBM AIX Systems Arp -s host name node address temp ping host name00408C110086 salesdept Example BOS Bull DPX Set up and attach a print queueFtp salesdept Connected to salesdept Print methods Section Setup for Macintosh Choose a Printer Verify the Communication Section Advanced Options LPT1 Logical PrintersAdvanced Options Character Set Conversion Strings Before and After Print Jobs String Substitutions PostScript Functions Mm top margin Hex Dump Mode Telnet salesdept Trying Telnet LoginRoot account AccountingPass Status LoggingLocally Administrated Address Snmp NetWare, Windows, OS/2 Appendix a Parameter listApple EtherTalk Unix TCP/IPFactory Default Settings Net Mask e.g .255.255.0 for class C, 0.0.0.0 for auto-sense Config FileNetWare Protocol Enabled Binary APRINT1 PRINTER4 Menu PR4WAIT. YES PRINTER8 Menu PR8WAIT. YES Appendix B Internal printouts Ordering Procedures Appendix C Protocol Support UpgradesUpgrading Procedures Upgrade using Axcfg Upgrade using TCP/IP Verify the Upgrade Network environments Appendix D Technical specificationsUnix features Axis on-line service Appendix E How to contact AxisAxis Communications KK Axis officesAxis Communications AB Axis Communications IncCapture IndexPros

NPS 532, NPS 530 specifications

Axis Communications, known for its innovative network video solutions, has recently introduced its new line of network power supplies, the NPS 530 and NPS 532. These robust devices are designed to meet the increasing power demands of network cameras, ensuring reliable and efficient operation in various surveillance applications.

The Axis NPS 530 and NPS 532 power supplies are engineered for optimal performance in network video installations. One of their main features is their high power output. The NPS 530 provides up to 60 W, while the NPS 532 delivers up to 120 W of power, making them suitable for powering multiple network devices simultaneously. This high power capability allows for the use of more advanced cameras equipped with enhanced features, such as pan-tilt-zoom (PTZ) functionality, which can require significantly more power.

Both models are equipped with Power over Ethernet (PoE) technology, which simplifies installation and reduces the need for additional wiring. PoE enables a single cable to provide both data connection and electrical power to devices, making the installation process more efficient and cost-effective. The NPS 530 and NPS 532 support the IEEE 802.3at and 802.3af PoE standards, ensuring compatibility with a wide range of network devices.

Another key characteristic of these power supplies is their resilience and reliability. The rugged design of the NPS series ensures durability in various environmental conditions, making them suitable for both indoor and outdoor installations. They are constructed with high-quality components that enhance their longevity, reducing the total cost of ownership over time.

The NPS 530 and NPS 532 also feature advanced thermal management systems. These systems help maintain optimal operating temperatures, preventing overheating during prolonged usage. Additionally, both models include LED indicators that provide real-time status updates, allowing users to monitor the operational state at a glance.

In conclusion, the Axis NPS 530 and NPS 532 power supplies stand out in the market for their high performance, advanced PoE technology, and robust design. They offer an ideal solution for modern surveillance needs, ensuring security professionals can deploy powerful network cameras with confidence. With these innovations, Axis Communications continues to set the standard in reliable video surveillance technology.
Top Page Image Contents