Axis Communications NPS 532, NPS 530 user manual Locally Administrated Address, Example

Page 68

Section 8: Advanced Options

Locally Administrated Address

Important:

Example 1:

Each NPS 530/532 is preconfigured with a unique Node Address (inden- tical to the serial number). You may change the node address to a Locally Administrated Address by editing the Node Address entry in your config file.

Always consult your network manager before changing the Node Address.

The Node Address consists of six hexadecimal numbers in the range 00 - FF. The numbers are separated by spaces.

The following config entry shows an example of a preconfigured Node Address:

NODE_ADDR. : 00 40 8C 11 00 86

A locally administrated address must begin with one of the hexadecimal numbers x2, x6, xA, or xE (xxxx xx10 in binary format). Examples: 02, 36, 5A and EE are valid leading numbers. No restrictions apply to the five remaining numbers.

Example 2: The following config entry shows an example of a locally administrated address:

NODE_ADDR. : 36 F3 10 2E 20 0B

If you enter an invalid address, the current Node Address will remain unchanged. It is not possible to set an address other than a valid locally administrated address or the preconfigured Node Address.

You can restore the preconfigured Node Address by entering the NPS 530/532 serial number, or an address consisting of all 0’s.

Example 3: The following config entry restores the Node Address to the preconfigured setting:

NODE_ADDR. : 00 00 00 00 00 00

68

Axis NPS 530/532 User’s Manual

Page 67 Page 69
Image 68
Page 67 Page 69
Contents Preface About AxisAbout this manual Emission notices Trademark acknowledgementsTable of contents Setup for Macintosh Section Introduction Where To Use it How It WorksPrint Server Mode and Remote Printer Mode Main Features Delivery AccessoriesSection Getting started Front Printer Installation Before you beginNetwork Installation Section Setup for NetWare Advantages Limitations Simplifies the queue and printer set-up Press Escape to return to the Main Menu Print Server Mode AutomaticPress Insert to add a new Print Server Print Server Mode Parameter Controlled Queue to Print ServerSelect Queue Servers 3.xx or Print Servers Press Insert to display the Queue Server Candidates listSelect Netware Menu Select Save, then select Cancel until Axcfg closes downStart AXCFG, and select NetWare Print Server Mode File Server Controlled Select Queues Serviced By Printer, then select Printer Select AXISnnnnnnSelect Serviced NetWare Servers Example Use Kilroy as configuration file server Remote Printer Mode Select Print Queue Information 3.xx or Print QueuesPress Insert to add a new queue Press Esc to return to the Main MenuSelect the first free slot in the Configured Printers list Press Esc to get back to the Main Menu, then exit PconsoleSelect AXISnnnnnn!n Example Use printer 0 at Bilbonlm as remote printer Verify the Communication Section Setup for Windows Windows for Workgroups Windows NTWindows Windows for Workgroups ExampleServer setup Client setupPrinting Select NetworkWindows Server setup Windows NT Close the Print ManagerOpen Print Manager Windows NT LPD printing Select TCP/IP Protocol and Related Components, then click OKActivate the NetBEUI protocol if not already activated Section Setup for OS/2Install the Axis Print Utility for OS/2 Install the Axis Print Utility for OS/2 Activate the NetBEUI ProtocolLAN Server LAN ManagerInstall the NPS 530/532 Create a Print Queue Sharing Print Queues NET Copy file name \\server name\queue name Section Setup for Unix systems Set up the NPS 530/532 as a TCP/IP nodeSet up and attach a print queue at your Unix workstation Prepare your system for a new TCP/IP nodeFind an unused IP address CommandsPrepare your system Set up your NPS 530/532 Arp -s host name node address temp ping host name IBM AIX Systems00408C110086 salesdept Example Set up and attach a print queue BOS Bull DPXFtp salesdept Connected to salesdept Print methods Section Setup for Macintosh Choose a Printer Verify the Communication Section Advanced Options Logical Printers LPT1Advanced Options Character Set Conversion Strings Before and After Print Jobs String Substitutions PostScript Functions Mm top margin Hex Dump Mode Telnet Login Telnet salesdept TryingAccounting Root accountStatus Logging PassLocally Administrated Address Snmp Appendix a Parameter list NetWare, Windows, OS/2Unix TCP/IP Apple EtherTalkFactory Default Settings Config File Net Mask e.g .255.255.0 for class C, 0.0.0.0 for auto-senseNetWare Protocol Enabled Binary APRINT1 PRINTER4 Menu PR4WAIT. YES PRINTER8 Menu PR8WAIT. YES Appendix B Internal printouts Upgrading Procedures Appendix C Protocol Support UpgradesOrdering Procedures Upgrade using Axcfg Upgrade using TCP/IP Verify the Upgrade Appendix D Technical specifications Network environmentsUnix features Appendix E How to contact Axis Axis on-line serviceAxis offices Axis Communications ABAxis Communications Inc Axis Communications KKIndex CapturePros

NPS 532, NPS 530 specifications

Axis Communications, known for its innovative network video solutions, has recently introduced its new line of network power supplies, the NPS 530 and NPS 532. These robust devices are designed to meet the increasing power demands of network cameras, ensuring reliable and efficient operation in various surveillance applications.

The Axis NPS 530 and NPS 532 power supplies are engineered for optimal performance in network video installations. One of their main features is their high power output. The NPS 530 provides up to 60 W, while the NPS 532 delivers up to 120 W of power, making them suitable for powering multiple network devices simultaneously. This high power capability allows for the use of more advanced cameras equipped with enhanced features, such as pan-tilt-zoom (PTZ) functionality, which can require significantly more power.

Both models are equipped with Power over Ethernet (PoE) technology, which simplifies installation and reduces the need for additional wiring. PoE enables a single cable to provide both data connection and electrical power to devices, making the installation process more efficient and cost-effective. The NPS 530 and NPS 532 support the IEEE 802.3at and 802.3af PoE standards, ensuring compatibility with a wide range of network devices.

Another key characteristic of these power supplies is their resilience and reliability. The rugged design of the NPS series ensures durability in various environmental conditions, making them suitable for both indoor and outdoor installations. They are constructed with high-quality components that enhance their longevity, reducing the total cost of ownership over time.

The NPS 530 and NPS 532 also feature advanced thermal management systems. These systems help maintain optimal operating temperatures, preventing overheating during prolonged usage. Additionally, both models include LED indicators that provide real-time status updates, allowing users to monitor the operational state at a glance.

In conclusion, the Axis NPS 530 and NPS 532 power supplies stand out in the market for their high performance, advanced PoE technology, and robust design. They offer an ideal solution for modern surveillance needs, ensuring security professionals can deploy powerful network cameras with confidence. With these innovations, Axis Communications continues to set the standard in reliable video surveillance technology.
Top Page Image Contents