34
Getting Started
Before You Begin
Before You Begin
10/100 Internal PS offers many features, but how you access and work with them is dependent on your environment. Before you begin, you need to get information from the 10/100 Internal PS configuration label.
Important • Make sure the printer is turned off (O).
Table 5 shows the minimum label widths needed to print a 10/100 Internal PS configuration label with different DPI printheads.
Table 5 • Label Width
DPI | Inches | MM |
|
|
|
300 | 2.50 | 63.50 |
|
|
|
To print a network configuration label for BBP81 (4”) and BBP81 (6”) printers with a 10/100 Internal PS, complete these steps:
1.Turn on (I) the printer and let it complete its
2.When the POST cycle is complete, press Setup/Exit to enter the Setup Mode.
3.Scroll through the parameters using the Plus (+ key) until you reach List Network.
4.Press Select to access List Network. Print+ displays.
5.Press Plus (+ key) to print the network configuration label.
Y885775 | BradyConnect 10/100 Internal Print Server User Guide | 07/18/2008 |