Siemens CL-010-I manual Overview, Physical Outlook, Front Panel, LED Indicators

Page 9
Chapter 1: Overview

Chapter 1: Overview

Chapter 1: Overview

This chapter provides you the description for the LED and connector for front and rear view of the router. Before you use/install this router, please take a look at this information first.

Physical Outlook

Front Panel

The following illustrations show the front panel of the ADSL Router:

LED Indicators

The ADSL Router is equipped with five LEDs on the front panel as described in the table below (from left to right):

 

LED

Color

Status

Description

 

Ethernet

Green

Unlit

Power off or no Ethernet carrier is present.

 

 

 

 

 

 

 

 

Blinking

Ethernet carrier is present and user data is going

 

 

 

 

through Ethernet port.

 

 

 

 

 

 

 

 

Solid

Ethernet carrier is present.

 

 

 

 

 

 

PPP

Green

Unlit

No PPPoA or PPPoE connection

 

 

 

Solid

At least one PPPoA or PPPoE connection is up. The

 

 

 

 

users can access the Internet now.

 

DSL

Green

Unlit

Power off or ADSL line connection is handshaking or

 

 

 

 

training is in progress.

 

 

 

 

 

 

 

 

Blinking

User data is going through ADSL port.

 

 

 

 

 

 

 

 

Solid

ADSL line connection is OK.

 

 

 

 

 

 

Power

Green

Unlit

Power off.

 

 

 

 

 

 

 

 

Solid

Power on.

 

 

 

 

 

Image 9
Contents User’s Manual CL-010/CL-010-I ADSL2+ RouterThis manual currently suits for CL-010/CL-010-I For Installation For Using For Service Safety NotesIC Statement FCC FCC Class B NoticeICES-003 Class B Notice - Avis NMB-003, Classe B ADSL Router User ManualPreface FeaturesATM Features ADSL ComplianceRouting Features Bridging FeaturesSecurity Features Configuration and ManagementUnpacking Subscription for ADSL Service Page Physical Outlook Chapter 1 OverviewLED Indicators Front Panel9 VAC Rear Panel9VAC EthernetSystem Requirement Chapter 2 System Requirement and InstallationChoosing a place for the ADSL Router ™ ™ ™ ™Connecting the ADSL Router Chapter 3 Configuration Setting TCP/IPFor Windows 7. On IP Address tab 9. Wait for Windows copying files 8. When returning to Network window, click OKFor Windows ME For Windows NT 5. Click Yes to use DHCP 9. When returning to Network window, click Close Option 2 If you have TCP/IP Protocol, go to Step 5. Click Internet Protocol TCP/IP and then click OK 4. Highlight Protocol and then click AddPanel and then click Network and Internet Connections For Windows XPProperties Click Internet ProtocolTCP/IP and then click OK9. Click Network and Internet 10. Select Network and Sharing Center For Windows Vista11. Click Manage Network Connection on the left side 12. Right click Local Area Connection and select PropertiesSelect Internet Protocol Version 4 TCP/IPv4 and press Properties Configure PC to get IP address from DHCP For Windows ME Enable Obtain an IP address automatically and then click OK When prompted with the message below, click Yes to continueWindows Vista For Windows 98ME Renew IP Address on Client PC3. Type cmd in the dialog box and the click OK 2. Select Run from the Start menu1. From the Start menu, point to Programs, Accessories and then click Command Prompt For Windows Vista Page Chapter 3Connecting and Accessing Internet Chapter 3 Connecting and Accessing InternetConfiguration PPP over ATM PPPoA ModePPP over ATM DescriptionPPP over ATM PPPoA IP Extension Mode 2. Go to Advanced - Internet - Connections. And click AddPrimary IP address192.168.1.1 Subnet Mask255.255.255.0 PPP over Ethernet PPP over Ethernet PPPoE ModePPP over Ethernet PPPoE IP Extension Mode WAN IP Address WAN Subnet Mask Primary DNS server Numbered IP over ATM IPoASecondary DNS server Primary IP Address Subnet mask Start IP Address End IP AddressIP Address Subnet Mask Gateway Numbered IP over ATM IPoA+NAT Secondary IP Address Subnet mask Primary DNS server Secondary DNS server Unnumbered IP over ATM IPoAIP Address Subnet Mask Gateway Primary IP Address Subnet mask Unnumbered IP over ATM IPoA+NATStart IP Address End IP Address Bridge Mode Using Web-Based Manager Chapter 4 Web ConfigurationOutline of Web Manager To Have the New Settings Take EffectLanguage TitleQuick Setup Quick StartConnect to Internet Connection TypePage PPP over ATM/ PPP over Ethernet PPP Username PPP PasswordAlways On Dial on DemandEnd IP Address Start IP AddressLeased Time DHCP Server OffNone IP over ATMWAN IP Address WAN Subnet MaskSubnet Mask Primary IP AddressSecondary IP Address Subnet MaskPlease wait for 2 minutes for restarting the router Bridging Subnet Mask Overview StatusADSL BER Test ADSL LineTraffic Statistics Internet ConnectionDHCP Table Routing TablePage Local Network- IP Address Advanced SetupLocal Network - DHCP Server Host NameServer and Relay Off Relay OnChapter 5Connection Mode Service Category Internet-Connections SettingLocal Network - UPnP Adding a New OneChapter 5Connection Mode Internet-DNS Server IGMP Proxy EnabledInternet-IGMP Proxy Internet ConnectionEnable ADSL Port Internet - ADSL SettingsCapability Enabled IP Routing - Static RouteGateway IP Address Configuring Other Routers on Your LANRemove Static Route Local RouterIP Routing - Dynamic Routing EnabledExample - Static Route For the Router’s Routing TableClick Apply to invoke the settings set here different interface. Otherwise, disable this functionVirtual Server-Port Forwarding Add New Port Forwarding IP Address seen by Internet UsersPre-defined User definedConnecting to the Virtual Servers Virtual Server-Port TriggeringFrom Internet Host IP Address Virtual Server - DMZ Host Virtual Server - Dynamic DNS Password:Dynamic DNS: Internet Connection:Firewall Filtering by IP addressSelect the direction to filter packets Protocol Allow TrafficSource/Destination IP address Port RangeBridge QoS Quality of ServiceTraffic Class Name 802.1p PriorityIPQoS IP type of ServiceSource IP Address/ Subnet Mask Source PortDestination Port Port MappingAvailable Interfaces Group NameDiagnostics ManagementRemote Access Admin AccountSelect the Internet Connection Web BrowserConfigure System Log UpdateInterntet Time System LogView System Log button Viewing System LogEnable TRAP Service SNMP SettingSNMP Agent Read CommunityBackup Config Update FirmwareReset Router http//192.168.1.1/index.html UPnP for XPChapter 5Connection Mode Chapter 5 Troubleshooting Problems with LANProblems with WAN Problems with Upgrading ARP Address Resolution Protocol Chapter 6 GlossaryDHCP Dynamic Host Configuration Protocol LAN Local Area Network & WAN Wide Area NetworkPublic IP Address Private IP AddressPVC Permanent Virtual Circuit RIP Routing Information ProtocolPage Chapter 7 Glossary Appendix A Specifications Appendix A Specifications Appendix B Server Setup for 802.1x Client Getting Client Certificate4. Make sure that Request a certificate is selected, and click Next Appendix C WEEE - B2C Appendix C WEEE - B2C