Siemens CL-010 Advanced Setup, Local Network- IP Address, Local Network - DHCP Server, Host Name

Page 65

Advanced Setup

Chapter 5:Connection Mode

Advanced Setup

Local Network- IP Address

This page is the same as you can see in the Configure LAN side Settings page while running the Quick Setup. It allows you to set IP Address and Subnet Mask values for LAN interface.

Primary IP Address:

Type in the first IP address that you got from your ISP for your LAN connection.

Subnet Mask:

Type in the subnet mask that you got from your ISP for your LAN connection.

Host Name:

List the host name of this device.

Domain Name:

List the name of domain.

Configure the second IP Address and Subnet Mask for LAN interface: Check this box to make another set of IP Address and Subnet Mask to connect to your router if they are not included in the range that DHCP server accepts.

Secondary IP Address:

Type in the second IP address that you got from your ISP for your LAN connection.

Subnet Mask:

Type in the subnet mask that you got from your ISP for your LAN connection.

MTU:

It means the maximum size of the packet that transmitted in the network. The packet of the data greater than the number set here will be divided into several packets for transmitting. Type in the number into the field of MTU. The default setting is 1500.

Apply:

Click this button to activate the settings listed above.

Local Network - DHCP Server

This allows you to set DHCP server on LAN interface.

Image 65

Contents This manual currently suits for CL-010/CL-010-I User’s ManualCL-010/CL-010-I ADSL2+ Router For Installation For Using For Service Safety NotesIC Statement FCC FCC Class B NoticeICES-003 Class B Notice - Avis NMB-003, Classe B ADSL Router User ManualPreface FeaturesATM Features ADSL ComplianceRouting Features Bridging FeaturesSecurity Features Configuration and ManagementUnpacking Subscription for ADSL Service Page Physical Outlook Chapter 1 OverviewLED Indicators Front Panel9 VAC Rear Panel9VAC EthernetSystem Requirement Chapter 2 System Requirement and InstallationChoosing a place for the ADSL Router ™ ™ ™ ™Connecting the ADSL Router Chapter 3 Configuration Setting TCP/IPFor Windows 7. On IP Address tab 9. Wait for Windows copying files 8. When returning to Network window, click OKFor Windows ME For Windows NT 5. Click Yes to use DHCP 9. When returning to Network window, click Close Option 2 If you have TCP/IP Protocol, go to Step 5. Click Internet Protocol TCP/IP and then click OK 4. Highlight Protocol and then click AddPanel and then click Network and Internet Connections For Windows XPProperties Click Internet ProtocolTCP/IP and then click OK9. Click Network and Internet 10. Select Network and Sharing Center For Windows VistaSelect Internet Protocol Version 4 TCP/IPv4 and press Properties 11. Click Manage Network Connection on the left side12. Right click Local Area Connection and select Properties Configure PC to get IP address from DHCP For Windows ME Enable Obtain an IP address automatically and then click OK When prompted with the message below, click Yes to continueWindows Vista For Windows 98ME Renew IP Address on Client PC3. Type cmd in the dialog box and the click OK 2. Select Run from the Start menu1. From the Start menu, point to Programs, Accessories and then click Command Prompt For Windows Vista Page Chapter 3Connecting and Accessing Internet Chapter 3 Connecting and Accessing InternetConfiguration PPP over ATM PPPoA ModePPP over ATM DescriptionPrimary IP address192.168.1.1 Subnet Mask255.255.255.0 PPP over ATM PPPoA IP Extension Mode2. Go to Advanced - Internet - Connections. And click Add PPP over Ethernet PPP over Ethernet PPPoE ModePPP over Ethernet PPPoE IP Extension Mode WAN IP Address WAN Subnet Mask Primary DNS server Numbered IP over ATM IPoASecondary DNS server Primary IP Address Subnet mask Start IP Address End IP AddressIP Address Subnet Mask Gateway Numbered IP over ATM IPoA+NAT Secondary IP Address Subnet mask Primary DNS server Secondary DNS server Unnumbered IP over ATM IPoAIP Address Subnet Mask Gateway Primary IP Address Subnet mask Unnumbered IP over ATM IPoA+NATStart IP Address End IP Address Bridge Mode Using Web-Based Manager Chapter 4 Web ConfigurationOutline of Web Manager To Have the New Settings Take EffectLanguage TitleQuick Setup Quick StartConnect to Internet Connection TypePage PPP over ATM/ PPP over Ethernet PPP Username PPP PasswordAlways On Dial on DemandEnd IP Address Start IP AddressLeased Time DHCP Server OffNone IP over ATMWAN IP Address WAN Subnet MaskSubnet Mask Primary IP AddressSecondary IP Address Subnet MaskPlease wait for 2 minutes for restarting the router Bridging Subnet Mask Overview StatusADSL BER Test ADSL LineTraffic Statistics Internet ConnectionDHCP Table Routing TablePage Local Network- IP Address Advanced SetupLocal Network - DHCP Server Host NameServer and Relay Off Relay OnChapter 5Connection Mode Service Category Internet-Connections SettingLocal Network - UPnP Adding a New OneChapter 5Connection Mode Internet-DNS Server IGMP Proxy EnabledInternet-IGMP Proxy Internet ConnectionEnable ADSL Port Internet - ADSL SettingsCapability Enabled IP Routing - Static RouteGateway IP Address Configuring Other Routers on Your LANRemove Static Route Local RouterIP Routing - Dynamic Routing EnabledExample - Static Route For the Router’s Routing TableClick Apply to invoke the settings set here different interface. Otherwise, disable this functionVirtual Server-Port Forwarding Add New Port Forwarding IP Address seen by Internet UsersPre-defined User definedFrom Internet Host IP Address Connecting to the Virtual ServersVirtual Server-Port Triggering Virtual Server - DMZ Host Virtual Server - Dynamic DNS Password：Dynamic DNS： Internet Connection：Select the direction to filter packets FirewallFiltering by IP address Protocol Allow TrafficSource/Destination IP address Port RangeBridge QoS Quality of ServiceTraffic Class Name 802.1p PriorityIPQoS IP type of ServiceSource IP Address/ Subnet Mask Source PortDestination Port Port MappingAvailable Interfaces Group NameDiagnostics ManagementRemote Access Admin AccountSelect the Internet Connection Web BrowserConfigure System Log UpdateInterntet Time System LogView System Log button Viewing System LogEnable TRAP Service SNMP SettingSNMP Agent Read CommunityReset Router Backup ConfigUpdate Firmware http//192.168.1.1/index.html UPnP for XPChapter 5Connection Mode Problems with WAN Chapter 5 TroubleshootingProblems with LAN Problems with Upgrading ARP Address Resolution Protocol Chapter 6 GlossaryDHCP Dynamic Host Configuration Protocol LAN Local Area Network & WAN Wide Area NetworkPublic IP Address Private IP AddressPVC Permanent Virtual Circuit RIP Routing Information ProtocolPage Chapter 7 Glossary Appendix A Specifications Appendix A Specifications 4. Make sure that Request a certificate is selected, and click Next Appendix B Server Setup for 802.1x ClientGetting Client Certificate Appendix C WEEE - B2C Appendix C WEEE - B2C