Using ActiveSync
You can use ActiveSync to synchronize information between your PA500 and your computer so you always have the most
Synchronizing Information with Your Computer
ActiveSync supports the following connection options between your device and your computer:
•USB connection - using the USB charging cable. This connection is established when you have created an ActiveSync partnership with your computer.
•Infrared connection - ideal for quickly switching between multiple devices since cables or adapters are not required.
•Bluetooth connection - applicable only if your computer is equipped with a Bluetooth adapter or access point.
To setup a USB ActiveSync connection:
1.Open ActiveSync on your computer.
2.Click File → Connection Settings.
3.Select the “Allow USB connections” check box.
4.Click OK.
5.Open ActiveSync on your device.
6.Tap Menu → Connections.
7.Select the “Synchronize all PCs using this connection” check box.
8.Select USB.
9.Tap ok.
10.Connect your device to your computer using the USB charging cable. Synchronization is automatically initiated.
To setup an Infrared ActiveSync connection:
1.Configure the infrared port on your computer. Refer to the computer’s documentation for instructions.
2.Once your computer’s IR port is ready, open ActiveSync on your computer.
3.Click File → Connection Settings.
4.On the “Allow connections to one of the following” list, select Infrared Port (IR).
5.Click OK.
24
Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
