Unitech PA500 user manual Back View, Recharge your device and perform an ActiveSync

Back View

No.	Component	Description
10.	Speaker	When speaker phone is active,
		sounds are emitted here.
11.	Battery release latch	Slide toward the right side of the device and hold firmly,
		then detach the battery from its bay.
12.	Reset button	Press the end of the stylus into the button to reset your
		device.
13.	Main battery	Removable and rechargeable 3.7 V, 2200 mAh battery
		pack.
14.	Universal connector	Connectsyouryourdevicedeviceto a USBto acharging/communicationUSB cable,cablewhich. This in
		USB cable connects to the computer's USB port and accepts the 5V AC
		turn connects to the computer’s USB port and through
		adapter to provide power to the PA500.
		the AC adapter to an electrical outlet. This allows you to
		The unit can simultaneously recharge and perform an ActiveSync
		recharge your device and perform an ActiveSync
		operation. You can also use it to connect peripheral hardware, such as
		aoperationdocking station,.	to your device.
		This port can also support USB and RS232 hosting for devices such as
		You can also use it to connect a peripheral hardware,
		a USB or RS232 scanner, keyboard, or USB memory key.
		such as a docking station, to your device.
15.	Earphone jack	Lift the rubber cover from the earphone jack and connect
		an audio line-out device (earphone or headphone).
16.	Right scanner trigger key	Press to activate the barcode laser scanner.
17.	Infrared (IR) port	Uses infrared technology to transmit and receive data
		from other IR-enabled devices.
18.	Stylus	To use the stylus, remove it from its holder and hold it the
		same way as you hold a pen or pencil.

4

Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.