Unitech user manual Powering On the PA500

Powering On the PA500

After you have initially charged your device for about 16 hours, the device is ready to be used. You can now start up your device where you can calibrate the screen, set up the system time zone, and learn some

basic stylus usage.

1.Turn on your device by pressing the Power button on the front panel.

NOTE: The PA500 screen ships with a protective plastic film. You may remove it by peeling from one corner. The screen will be more susceptible to scratching without

the film, but will be more readable.

The unitech PA500 welcome screen appears. The Windows Mobile screen will appear shortly.

2.Calibrate the PA500

The calibrate screen will automatically appear when the unit is powered-on for the first time or after the system is reset. This screen can also be accessed at any time by tapping Start → Settings → System tab → Screen.

The PA500 will prompt you to calibrate the unit by tapping a sequence of screen locations. Tap gently but firmly. When you have completed the series of taps, press the Enter button to confirm it.

3.Set the Time Zone, Date, and Time

Select your current time zone from the Time zone drop-down menu, then tap Next.

4.Follow all onscreen instructions to complete the set up. The setup wizard provides tips for using the pop-up menus and assign a lock password to access your device.

After the device setup, you can create an ActiveSync partnership to synchronize information between your computer and your device. See Establishing Device-PC Connection on page 21 for detailed instructions.

8

Copyright 2007 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.