Linksys WAP54GX manual 3 Setup - Static IP Screen

Models: WAP54GX

1 64
Download 64 pages 38.46 Kb
Page 28
Image 28
Figure 6-3: Setup - Static IP Screen

Wireless-G Access Point with SRX

Select Static IP if you want to assign a static or fixed IP address to the Access Point. Then complete the following:

IP Address. The IP address must be unique to your network. We suggest you use the default IP address of 192.168.1.245.

Subnet Mask. The Subnet Mask must be the same as that set on your Ethernet network.

Default Gateway. Enter the IP address of your network’s gateway. The gateway is the device that enables communication between your computers and the Internet. In most cases, your router acts as your gateway.

Change these settings as described here and click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Click Help for more information.

Chapter 6: Configuring the Wireless-G Access Point with SRX

Figure 6-3: Setup - Static IP Screen

static ip address: a fixed address assigned to a computer or device that is connected to a network.

22

The Setup - Network Setup Tab

Page 28
Image 28
Linksys WAP54GX manual 3 Setup - Static IP Screen