Linksys WAP54GX manual The Back Panel

Models: WAP54GX

1 64
Download 64 pages 38.46 Kb
Page 13
Image 13
The Back Panel

Wireless-G Access Point with SRX

The Back Panel

The Access Point's Ethernet network and power ports, as well as the Reset button, are located on the back panel.

Figure 3-2: Back Panel

Reset Button There are two ways to reset the Access Point's factory defaults. Either press the Reset button, for approximately ten seconds, or use the Administration - Factory Defaults screen of the Access Point's Web-based Utility.

Ethernet Port The Ethernet network port connects to an Ethernet network device, such as a switch or router.

Power Port The Power port connects to the Access Point’s power adapter.

IMPORTANT: Resetting the Access Point will erase all of your settings (including wireless security, IP address, and power output) and replace them with the factory defaults. Do not reset the Access Point if you want to retain these settings.

port: the connection point on a computer or networking device used for plugging in cables or adapters

Chapter 3: Getting to Know the Wireless-G Access Point with SRX

7

The Back Panel

Page 13
Image 13
Linksys WAP54GX manual The Back Panel