Linksys WAP54GX manual Wireless, Administration, Status

Models: WAP54GX

1 64
Download 64 pages 38.46 Kb
Page 26
Image 26

Wireless-G Access Point with SRX

Wireless

You will use the Wireless tabs to enter a variety of wireless settings for the Access Point.

Basic Wireless Settings. Enter the network mode, SSID, and other basic settings on this screen.

Wireless Security. Use this screen to configure the Access Point’s wireless security settings.

Wireless MAC Filter. From this screen, you can allow access to your wireless network by MAC address.

Advanced Wireless Settings. Configure the Access Point’s more advanced wireless settings.

Administration

You will use the Administration tabs to manage the Access Point.

Management. This screen allows you to customize the password settings, as well as back up or restore the Access Point’s configuration file.

Log. Configure the Log settings for the Access Point on this screen.

Factory Defaults. Use this screen to reset the Access Point to its factory default settings.

Firmware Upgrade. Upgrade the Access Point’s firmware on this screen.

Status

You will be able to view status information for your local and wireless network.

Local Network. This screen will display current information on the Access Point and its local network.

Wireless Network. This screen will display current information on the Access Point and its wireless network.

Chapter 6: Configuring the Wireless-G Access Point with SRX

firmware: the programming code that runs a networking device.

20

Navigating the Utility

Page 26
Image 26
Linksys WAP54GX manual Wireless, Administration, Status, firmware the programming code that runs a networking device