Wireless-G Access Point with SRX

The Administration - Factory Defaults Tab

On this screen you can restore the Access Point’s factory default settings.

Management

Write down any custom settings before you restore the factory defaults. Once the Access Point is reset, you will have to re-enter all of your configuration settings.

Factory Defaults

Restore Factory Defaults. To restore the Access Point's factory default settings, click this button. Then follow the on-screen instructions.

Click Help for more information.

The Administration - Firmware Upgrade Tab

On this screen you can upgrade the Access Point’s firmware. Do not upgrade the firmware unless you are experiencing problems with the Access Point or the new firmware has a feature you want to use.

Firmware Upgrade

Before you upgrade the Access Point’s firmware, write down all of your custom settings. After you upgrade its firmware, you will have to re-enter all of your configuration settings. To upgrade the Access Point’s firmware:

1.Download the firmware upgrade file from the Linksys website, www.linksys.com.

2.Extract the firmware upgrade file on your computer.

3.On the Firmware Upgrade screen, enter the location of the firmware upgrade file in the field provided, or click the Browse button to find the file.

4.Click the Upgrade button, and follow the on-screen instructions.

Click Help for more information.

Chapter 6: Configuring the Wireless-G Access Point with SRX

Figure 6-17: Administration - Factory Defaults Screen

Figure 6-18: Administration - Firmware Upgrade Screen

upgrade: to replace existing software or firmware with a newer version

32

The Administration - Factory Defaults Tab

Page 38
Image 38
Linksys WAP54GX manual Administration Factory Defaults Tab, Administration Firmware Upgrade Tab