Siemens 5935, 5930 manual Hardware Specifications for

Page 12

SIEMENS 5930/5935 Business Gateway

Chapter 1 Product Specifications

User’s Guide

Hardware Specifications for 5935

 

 

Hardware Specifications for 5935

Physical Specifications

Dimensions:

11.75W x 6D x 2.25H inches

29.8W x 15.2D x 5.7H cm

Weight:

1.5 lbs.

.68 Kg.

Power Requirements

AC Voltage:100 to 120V AC or 220 to 240V AC

Frequency:50/60 Hz

Consumption:10W maximum

LAN Interface

Built-in eight port Ethernet switch with RJ-45 connectors

Green/Amber LEDs

LAN speed of 10 or 100 Mbps, full or half duplex, with auto-sense switch

Operational Environment

Temperature:40°F to 105°F

5°C to 40°C

Humidity:20% to 80% non-condensing

Processor

Motorola® 32 MHz MPC855T

8 MB DRAM, 4 MB Flash Memory

3DES, DES, MD5, SHA hardware assist

WAN Interface

One Digital Subscriber Line interface as follows:

ADSL, Annex B

RJ-11 with 2-3 pinout (center pair)

Serial Interface

One RS-232 asynchronous console or external modem port (RJ-45)

Agency Approvals

CE Mark

TUV

Safety:UL 1950, CSA 22.2, EN 60950

Emissions:FCC Part 15 Class B, EN55022

Immunity:EN50082-1, EN55024

SIEMENS

6

Image 12
Contents 5930/5935 Software License and Limited Warranty Software LicenseGeneral Provisions Table of Contents Installation Easy SetupUser Setup Advanced SetupSecurity Setup Monitoring RouterFront Panel for Back Panel forHardware Specifications for Software Specifications for PPP RFC SecurityFront Panel for Hardware Specifications for Software Specifications for IP Address Translation Installation Requirements Package ContentsPC Requirements Network Service Provider Requirements Hardware Installation PC Configuration Windows 98/MEWindows NT Select TCP/IP Protocol from the Network Protocols listWindows Windows XP Mac OS Mac OSX Linux Configuring the Router Establish ConnectionRouter Information To do this Refer toAccess Easy Setup Wizard Select ProtocolBridging Enabled IP Routing EnabledNAT Enabled Block Net Bios TrafficPoint-to-Point Protocol over Ethernet over PPPoA Point-to-Point Protocol over Ethernet over RFC1483 RFC RFC 1483 MAC Encapsulated Routing MER Dynamic Host Configuration Protocol Local Area Network Configuration User Setup User ManagementAdding/Modifying a User Account Deleting a User Account User Lookup LocalRadius NoneSecure Mode Configuration TrustedUntrusted Configure the Radius Server Configure the TacPlus Server Management Classes Class Functional AreasChange Password Access Control No access restrictionsClick Save and Reboot Telnet WebAdvanced Setup Router Clock Dhcp QoS Configure QoS Policy Siemens Reorder QoS Policies To the endBefore policy Routing Table Configuration Dial Backup Click Enable Dial BackupInternal Modem External Modem Switch Management Switch Mirror Configuration Switch Age Time ATM Traffic Shaping Constant Bit Rate Real-Time Variable Bit RateNon Real-Time Variable Bit Rate Unspecified Bit RateCommand Line Interface Security Setup NAT Disable DefaultPort Number Snmp Password Enter the New Password and New Password againSnmp IP Filter Click Add IP RangeSecure Shell Key GeneratorConfigure SSH Load Keys Key Generator Firewall Scripts Stateful Firewall Firewall RulesConfigure Stateful Firewall View Dropped Packets Configure Firewall Rules Protocol/Port ApplicationDelete Firewall Rules IKE/IPSec Configuration Easy IKE/IPSec Setup Advanced IKE/IPSec Setup IKE PeersIKE Peers Definition IKE Proposals Definition IKE IPSec Proposals Definition Siemens IKE IPSec Policies Definition Siemens VPN Log On Monitoring Router System SummaryEthernet Interface Information Remote Connection InformationIP Routing Information System InformationDiagnostics PPPoE SessionInterface Information ATM StatisticsRouting Table Information Files InformationList All Configuration Data Memory UsageTCP/IP Statistics