Siemens 5935, 5930 manual Security Setup

Chapter 6 Security Setup

This chapter describes how to configure security features on the router. Security features are listed below. To configure one of these features, click the link on the left navigation pane of the Router Information page.

NAT	Network Address Translation provides a level of security by
	hiding the private IP addresses of your LAN behind a single
	public IP address of your router.
SNMP	Simple Network Management Protocol controls message
	exchanges between a management client and a management
	agent.
Secure Shell	Secure Shell (SSH) secures network services over an
	insecure network such as the public Internet.
Firewall Scripts	Secures network and data communications with built-in firewall
	capabilities. A firewall is any combination of hardware and
	software that secures a network and traffic on the network to
	prevent interception or intrusion.
Stateful Firewall	An IP filtering firewall that examines the packet’s header
	information and matches it against a set of defined rules.
IKE/IPSec Configuration	Internet Key Exchange/Internet Protocol Security provides
	authentication and encryption of IP traffic for authenticity,
	integrity, and privacy.
VPN Log On	Start an IPSec session.

SIEMENS 56