Siemens 5450 manual Any IP Address

Page 56

5450 Four-Port Router User’s Guide

Configuring Advanced Features

9.If you selected This IP Address, enter an IP address in the IP Address field and do one of the following:

•Enter a netmask in the Netmask field.

•Select or Host to use your router netmask as the source netmask.

10.Under the Destination heading, select a network connection from the Network Interface drop-down menu.

11.Select one of the following options:

•Any IP Address

Select this option if this rule applies to any IP address of the destination.

•This IP Address

Select this option if a rule applies to a specific IP address of the destination.

12.If you selected This IP Address, enter an IP address in the IP Address field and do one of the following:

•Enter a netmask in the Netmask field.

•Select or Host to use your router netmask as the destination netmask.

13.Click Next. This displays the “Protocol Definition” window.

14.Do one of the following:

•Select one of the following protocol options from the Select by Name drop-down menu. This defines the types of packets filtered.

−Any Protocol

−TCP (Transmission Control Protocol):

Provides reliable, sequenced, and unduplicated delivery of bytes to remote or local users. Click Next to display the “TCP/UDP Options” window.

−UDP (User Datagram Protocol):

Provides for the exchange of datagrams without acknowledgement or guaranteed delivery. Click Next to display the “TCP/UDP Options” window.

−ICMP (Internet Control Message Protocol):

A mechanism that provides for peer communication. The most commonly used application for this protocol is the PING command. Click Next to display the “ICMP Options” window.

−GRE (Generic Routing Encapsulation):

A tunneling protocol that is used primarily for VPN (Virtual Private Networks).

•Type a protocol number in the Select by Number field.

15.Click Finish.

51

Page 55 Page 57
Image 56
Page 55 Page 57
Contents SpeedStream→ Residential Family User’s Guide Four-Port RouterFour-Port Router User’s Guide Limitations Contents Four-Port Router User’s Guide Contents Features of the 5450 Router Network LAN FeaturesSecurity Features IntroductionPackage Contents Minimum System RequirementsRear Panel Physical DetailsFront Panel LEDs Page General Safety Guidelines Basic Installation Procedure InstallationHardware Installation Installing Line Filters In-Line FilterConnecting Cables to Ethernet Connect the Ethernet cablesOperating System Configuration Check TCP/IP Protocol SettingsChecking TCP/IP Settings Windows 9x/ME Checking TCP/IP Settings Windows Checking TCP/IP Settings Windows XP Checking TCP/IP Settings MAC OS 8.6 through Checking TCP/IP Settings MAC OSX Internet Access Configuration Click Setup. This starts the New Connection WizardFor Windows 9x/2000 For Windows XPTo do this Refer to SpeedStream Router SetupBefore Configuring the Router Connecting to the Router Using your Web BrowserRouter Setup Wizard Surf Now ContinueHome Window Menu BarLogging out of the Router ToolbarLogging into the Router Adding a User Configuring Users and DevicesConfiguring Users Disable all Content Filtering Administrator GamerWeb Surfer Only allowed fromInfinite Time MinutesPage Editing a User Profile Deleting a User Click Delete UserViewing User Logs Configuring Devices Configuring Advanced Features Gateway Options discussed in this chapterISP Connection Advanced ISP Settings Configure the ATM Virtual CircuitATM Virtual Circuits Static Routes To set up Dynamic DNS on the router Dynamic DNSRIP Routing Information Protocol Home Network LAN/WAN Port UPnPIP Network Server Ports LAN/WAN Port UPnP Universal Plug and Play Select Universal Plug and PlayDisable UPnP Enable Discovery and Advertisement only SsdpEnable full Internet Gateway Device IGD support Enable Access LoggingSecurity Firewall Settings LevelAttack Detection IP FilteringSecurity Level LowHigh CustomAttack Detection Fragmented TCP Packet Fragmented TCP HeaderFragmented UDP Header Fragmented Icmp HeaderIP Filtering Any IP Address This IP AddressAny IP Address Any Less than or equal toEqual to Greater than or equal toIcmp Options Window Clone IP Filter Rules Disable DMZ Enable DMZ with this Host IP addressMake Settings Permanent Make Settings Last forDisable Snooze Enable Snooze, and set the Snooze time interval toReset the Snooze time interval to Firewall Snooze ControlAdministrator Password Click Save SettingsAddress Translation Port By-Pass NaptAddress Translation With NAT Address Translation With Napt Redirect selected protocol/service to this router Redirect selected protocol/service to IP Address− Telnet − DomainMonitoring Router Health Gateway Health options discussed in this chapterStatistics Internet StatsHome Networking Stats Security StatsInternet Stats ATM StatisticsEthernet Home Networking Stats Logging System LoggingLocal Update FirmwareRemote Diagnostics Miscellaneous Router Options CustomizeColor Palette Language Select Yes for Enable Time Client Time ZoneReboot Troubleshooting General IssuesInternet Access Problem Cant connect to the router to configure itContacting Technical Support TelephoneFax InternetSpecifications Routing Bridging AAL and ATM Support Power Certifications OAM F5Siemens Subscriber Network

5450 specifications

The Siemens 5450 is a state-of-the-art industrial automation platform designed to enhance manufacturing processes and improve operational efficiency. This advanced system integrates robust hardware and innovative software solutions, making it a vital tool for businesses looking to stay competitive in a rapidly evolving landscape.

One of the main features of the Siemens 5450 is its modular architecture, allowing for easy customization and scalability. This means organizations can tailor the system according to their specific needs, expanding capabilities as their operations grow. The system accommodates a variety of modules, including I/O, communication, and processing units, ensuring that it can support diverse applications across industries.

The Siemens 5450 is also equipped with the latest technologies in connectivity and communication. It supports industrial Ethernet, enabling seamless integration with existing network infrastructure, and facilitating real-time data exchange. This connectivity ensures that production processes are monitored and controlled efficiently, maximizing productivity while minimizing downtime.

Another significant characteristic of the Siemens 5450 is its sophisticated processing power. The platform is built on high-performance processors that provide rapid data processing capabilities. This performance is crucial for applications that require quick decision-making, such as quality control and machine management. Additionally, the system supports advanced algorithms for predictive maintenance, allowing businesses to anticipate equipment failures before they occur.

Security is a top priority for the Siemens 5450. The platform incorporates various security measures, including user authentication, data encryption, and secure communication protocols. These features protect sensitive information and maintain the integrity of the system, which is critical in today’s connected industrial environments.

Furthermore, the Siemens 5450 boasts an intuitive user interface that simplifies operation and monitoring. The graphical interface is designed for ease of use, allowing operators to navigate through processes and data effortlessly. This usability enhances training for new staff and reduces the potential for human error.

In conclusion, the Siemens 5450 is a comprehensive industrial automation platform that combines flexibility, advanced communication, and powerful processing capabilities. Its focus on security and user-centered design makes it an ideal choice for companies aiming to streamline operations and embrace the future of manufacturing technology.
Top Page Image Contents