Siemens 5450 manual Physical Details, Front Panel LEDs, Rear Panel

Page 8

5450 Four-Port Router User’s Guide

Introduction

Physical Details

Familiarize yourself with the router before installing.

Front Panel LEDs

The front panel contains the following LEDs:

Power

Off

Power is off.

 

Green

Power is on.

 

Flashing

Flash write in progress.

 

 

Example Front Panel

 

Red

The Power LED briefly shows red

 

 

during power-up. This indicates that the

 

 

SpeedStream is conducting the POST

 

 

(Power-On Self Test) that is run each

 

 

time the SpeedStream is powered on.

 

 

Post error occurred if persistent.

DSL Port

On

DSL connection is active.

 

Off

No active DSL connection.

Ethernet

On

One or more Ethernet LAN ports are

 

 

active.

 

Off

No active Ethernet LAN port

 

 

connection.

Activity

Off

No data being transmitted or received.

 

Flashing

Data is being transmitted or received.

Internet

Off

No power or bridge mode or no DSL

 

 

link.

 

Green

DLS link is up + WAN interface + WAN

 

 

interface has IP address.

Rear Panel

DSL Port

Connect the RJ11 DSL cable (looks like a telephone

(RJ11)

cord) here to use your DSL connection through an

 

existing phone line.

Four 10/100

Example Rear Panel

Connect the RJ45 Ethernet cable here to connect

Ethernet Ports

your computers, hubs, or switches to the router.

 

You can configure port #4 as either a LAN or WAN

 

port.

Power Adapter

Connect the supplied power adapter provided with

Port

the router here.

3

Image 8 Contents
SpeedStream→ Residential Family User’s Guide Four-Port RouterFour-Port Router User’s Guide Limitations Contents Four-Port Router User’s Guide Contents Features of the 5450 Router Network LAN FeaturesSecurity Features IntroductionPackage Contents Minimum System RequirementsRear Panel Physical DetailsFront Panel LEDs Page General Safety Guidelines Basic Installation Procedure InstallationHardware Installation Installing Line Filters In-Line FilterConnecting Cables to Ethernet Connect the Ethernet cablesOperating System Configuration Check TCP/IP Protocol SettingsChecking TCP/IP Settings Windows 9x/ME Checking TCP/IP Settings Windows Checking TCP/IP Settings Windows XP Checking TCP/IP Settings MAC OS 8.6 through Checking TCP/IP Settings MAC OSX Internet Access Configuration Click Setup. This starts the New Connection WizardFor Windows 9x/2000 For Windows XPTo do this Refer to SpeedStream Router SetupBefore Configuring the Router Connecting to the Router Using your Web BrowserRouter Setup Wizard Surf Now ContinueHome Window Menu BarLogging out of the Router ToolbarLogging into the Router Adding a User Configuring Users and DevicesConfiguring Users Disable all Content Filtering Administrator GamerWeb Surfer Only allowed fromInfinite Time MinutesPage Editing a User Profile Deleting a User Click Delete UserViewing User Logs Configuring Devices Configuring Advanced Features Gateway Options discussed in this chapterISP Connection Advanced ISP Settings Configure the ATM Virtual CircuitATM Virtual Circuits Static Routes To set up Dynamic DNS on the router Dynamic DNSRIP Routing Information Protocol Home Network LAN/WAN Port UPnPIP Network Server Ports LAN/WAN Port UPnP Universal Plug and Play Select Universal Plug and PlayDisable UPnP Enable Discovery and Advertisement only SsdpEnable full Internet Gateway Device IGD support Enable Access LoggingSecurity Firewall Settings LevelAttack Detection IP FilteringSecurity Level LowHigh CustomAttack Detection Fragmented TCP Packet Fragmented TCP HeaderFragmented UDP Header Fragmented Icmp HeaderIP Filtering Any IP Address This IP AddressAny IP Address Any Less than or equal toEqual to Greater than or equal toIcmp Options Window Clone IP Filter Rules Disable DMZ Enable DMZ with this Host IP addressMake Settings Permanent Make Settings Last forDisable Snooze Enable Snooze, and set the Snooze time interval toReset the Snooze time interval to Firewall Snooze ControlAdministrator Password Click Save SettingsAddress Translation Port By-Pass NaptAddress Translation With NAT Address Translation With Napt Redirect selected protocol/service to this router Redirect selected protocol/service to IP Address− Telnet − DomainMonitoring Router Health Gateway Health options discussed in this chapterStatistics Internet StatsHome Networking Stats Security StatsInternet Stats ATM StatisticsEthernet Home Networking Stats Logging System LoggingLocal Update FirmwareRemote Diagnostics Miscellaneous Router Options CustomizeColor Palette Language Select Yes for Enable Time Client Time ZoneReboot Troubleshooting General IssuesInternet Access Problem Cant connect to the router to configure itContacting Technical Support TelephoneFax InternetSpecifications Routing Bridging AAL and ATM Support Power Certifications OAM F5Siemens Subscriber Network