Siemens 5450 manual Troubleshooting, Overview, General Issues, Internet Access

Page 79

Appendix A

Troubleshooting

Overview

A

This chapter covers some common problems that may be encountered while using the router and some possible solutions to them. If you follow the suggested steps and the router still does not function properly, contact your Internet Service Provider or Technical Support for assistance.

General Issues

Problem: Can't connect to the router to configure it.

Solution: Check the following:

•The router is properly installed, connections are OK, and it is powered ON. Check the LEDs for Ethernet port status.

•Ensure that your computer and the router are on the same network segment.

•If your computer is set to "Obtain an IP Address automatically" (DHCP client), restart your computer.

Internet Access

Problem : When I enter a Web site address or IP address I get a time out error.

Solution: A number of things could be causing this. Try the following troubleshooting steps.

•Verify that other computers work. If they do, ensure that your computer’s IP settings are correct. If using a fixed (static) IP address, check the network mask, default router and DNS settings as well as the IP address.

•If the computers are configured correctly, but still not working, check the router. Ensure that it is connected and on. Connect to it and check its settings. (If you cannot connect to it, check the Ethernet and power connections.)

Problem: Some applications do not run properly when using the router.

Solution: The router processes the data passing through it, so it is not transparent.

•If you are running a supported Windows operating system, ensure that the UPnP feature is enabled.

•If this does not solve the problem or your operating system does not support UPnP you can use the DMZ function. This should work with almost every application, but:

-It is a security risk, since the firewall is disabled for the DMZ computer.

-Only one (1) computer can use this feature.

•Another option is to use the Firewall Snooze Control feature to temporarily disable the firewall to allow the application to function unimpeded.

74

Page 78 Page 80
Image 79
Page 78 Page 80
Contents Four-Port Router SpeedStream→ Residential Family User’s GuideFour-Port Router User’s Guide Limitations Contents Four-Port Router User’s Guide Contents Introduction Features of the 5450 RouterNetwork LAN Features Security FeaturesMinimum System Requirements Package ContentsFront Panel LEDs Physical DetailsRear Panel Page General Safety Guidelines Hardware Installation InstallationBasic Installation Procedure In-Line Filter Installing Line FiltersConnect the Ethernet cables Connecting Cables to EthernetCheck TCP/IP Protocol Settings Operating System ConfigurationChecking TCP/IP Settings Windows 9x/ME Checking TCP/IP Settings Windows Checking TCP/IP Settings Windows XP Checking TCP/IP Settings MAC OS 8.6 through Checking TCP/IP Settings MAC OSX For Windows XP Internet Access ConfigurationClick Setup. This starts the New Connection Wizard For Windows 9x/2000Before Configuring the Router SpeedStream Router SetupTo do this Refer to Using your Web Browser Connecting to the RouterRouter Setup Wizard Continue Surf NowMenu Bar Home WindowLogging into the Router ToolbarLogging out of the Router Configuring Users Configuring Users and DevicesAdding a User Disable all Content Filtering Only allowed from AdministratorGamer Web SurferMinutes Infinite TimePage Editing a User Profile Click Delete User Deleting a UserViewing User Logs Configuring Devices Gateway Options discussed in this chapter Configuring Advanced FeaturesISP Connection Configure the ATM Virtual Circuit Advanced ISP SettingsATM Virtual Circuits Static Routes Dynamic DNS To set up Dynamic DNS on the routerRIP Routing Information Protocol LAN/WAN Port UPnP Home NetworkIP Network Server Ports LAN/WAN Port Select Universal Plug and Play UPnP Universal Plug and PlayEnable Access Logging Disable UPnPEnable Discovery and Advertisement only Ssdp Enable full Internet Gateway Device IGD supportSecurity IP Filtering Firewall SettingsLevel Attack DetectionCustom Security LevelLow HighAttack Detection Fragmented Icmp Header Fragmented TCP PacketFragmented TCP Header Fragmented UDP HeaderIP Filtering This IP Address Any IP AddressAny IP Address Greater than or equal to AnyLess than or equal to Equal toIcmp Options Window Clone IP Filter Rules Make Settings Last for Disable DMZEnable DMZ with this Host IP address Make Settings PermanentFirewall Snooze Control Disable SnoozeEnable Snooze, and set the Snooze time interval to Reset the Snooze time interval toClick Save Settings Administrator PasswordPort By-Pass Napt Address TranslationAddress Translation With NAT Address Translation With Napt − Domain Redirect selected protocol/service to this routerRedirect selected protocol/service to IP Address − TelnetGateway Health options discussed in this chapter Monitoring Router HealthSecurity Stats StatisticsInternet Stats Home Networking StatsATM Statistics Internet StatsEthernet Home Networking Stats System Logging LoggingRemote Update FirmwareLocal Diagnostics Customize Miscellaneous Router OptionsColor Palette Language Time Zone Select Yes for Enable Time ClientReboot Problem Cant connect to the router to configure it TroubleshootingGeneral Issues Internet AccessInternet Contacting Technical SupportTelephone FaxSpecifications OAM F5 Routing Bridging AAL and ATM Support Power CertificationsSiemens Subscriber Network

5450 specifications

The Siemens 5450 is a state-of-the-art industrial automation platform designed to enhance manufacturing processes and improve operational efficiency. This advanced system integrates robust hardware and innovative software solutions, making it a vital tool for businesses looking to stay competitive in a rapidly evolving landscape.

One of the main features of the Siemens 5450 is its modular architecture, allowing for easy customization and scalability. This means organizations can tailor the system according to their specific needs, expanding capabilities as their operations grow. The system accommodates a variety of modules, including I/O, communication, and processing units, ensuring that it can support diverse applications across industries.

The Siemens 5450 is also equipped with the latest technologies in connectivity and communication. It supports industrial Ethernet, enabling seamless integration with existing network infrastructure, and facilitating real-time data exchange. This connectivity ensures that production processes are monitored and controlled efficiently, maximizing productivity while minimizing downtime.

Another significant characteristic of the Siemens 5450 is its sophisticated processing power. The platform is built on high-performance processors that provide rapid data processing capabilities. This performance is crucial for applications that require quick decision-making, such as quality control and machine management. Additionally, the system supports advanced algorithms for predictive maintenance, allowing businesses to anticipate equipment failures before they occur.

Security is a top priority for the Siemens 5450. The platform incorporates various security measures, including user authentication, data encryption, and secure communication protocols. These features protect sensitive information and maintain the integrity of the system, which is critical in today’s connected industrial environments.

Furthermore, the Siemens 5450 boasts an intuitive user interface that simplifies operation and monitoring. The graphical interface is designed for ease of use, allowing operators to navigate through processes and data effortlessly. This usability enhances training for new staff and reduces the potential for human error.

In conclusion, the Siemens 5450 is a comprehensive industrial automation platform that combines flexibility, advanced communication, and powerful processing capabilities. Its focus on security and user-centered design makes it an ideal choice for companies aiming to streamline operations and embrace the future of manufacturing technology.
Top Page Image Contents