Siemens 5450 manual Reboot

Page 78

5450 Four-Port Router User’s Guide

Miscellaneous Gateway Options

Reboot

You can reboot the router using the Reboot option, or you can reset the router to factory defaults using the reset option. Reboot should be used when the router needs to be restarted. The router can also be rebooted using the power switch on the rear panel of the router. This option can be used at either the user or administrator level.

To reboot or reset factory defaults on the router:

1.Click the Reboot button from the Gateway Options pane. This displays the “System Reboot” window.

2.If you want the factory default settings to be reset, click Reset to Factory Defaults. Reset should be used when you find it necessary to recover the factory default settings. This may be necessary when a custom configuration did not go as planned, when a new configuration is desired, or when the router does not appear to be working properly. This option resets all custom settings, users, and passwords on your router. You must be logged on as the administrator to use this option.

3.Click Reboot.

73

Image 78

Contents

SpeedStream→ Residential Family User’s Guide Four-Port RouterFour-Port Router User’s Guide Limitations Contents Four-Port Router User’s Guide Contents Security Features Features of the 5450 RouterNetwork LAN Features IntroductionPackage Contents Minimum System RequirementsPhysical Details Front Panel LEDsRear Panel Page General Safety Guidelines Installation Hardware InstallationBasic Installation Procedure Installing Line Filters In-Line FilterConnecting Cables to Ethernet Connect the Ethernet cablesOperating System Configuration Check TCP/IP Protocol SettingsChecking TCP/IP Settings Windows 9x/ME Checking TCP/IP Settings Windows Checking TCP/IP Settings Windows XP Checking TCP/IP Settings MAC OS 8.6 through Checking TCP/IP Settings MAC OSX For Windows 9x/2000 Internet Access ConfigurationClick Setup. This starts the New Connection Wizard For Windows XPSpeedStream Router Setup Before Configuring the RouterTo do this Refer to Connecting to the Router Using your Web BrowserRouter Setup Wizard Surf Now ContinueHome Window Menu BarToolbar Logging into the RouterLogging out of the Router Configuring Users and Devices Configuring UsersAdding a User Disable all Content Filtering Web Surfer AdministratorGamer Only allowed fromInfinite Time MinutesPage Editing a User Profile Deleting a User Click Delete UserViewing User Logs Configuring Devices Configuring Advanced Features Gateway Options discussed in this chapterISP Connection Advanced ISP Settings Configure the ATM Virtual CircuitATM Virtual Circuits Static Routes To set up Dynamic DNS on the router Dynamic DNSRIP Routing Information Protocol Home Network LAN/WAN Port UPnPIP Network Server Ports LAN/WAN Port UPnP Universal Plug and Play Select Universal Plug and PlayEnable full Internet Gateway Device IGD support Disable UPnPEnable Discovery and Advertisement only Ssdp Enable Access LoggingSecurity Attack Detection Firewall SettingsLevel IP FilteringHigh Security LevelLow CustomAttack Detection Fragmented UDP Header Fragmented TCP PacketFragmented TCP Header Fragmented Icmp HeaderIP Filtering Any IP Address This IP AddressAny IP Address Equal to AnyLess than or equal to Greater than or equal toIcmp Options Window Clone IP Filter Rules Make Settings Permanent Disable DMZEnable DMZ with this Host IP address Make Settings Last forReset the Snooze time interval to Disable SnoozeEnable Snooze, and set the Snooze time interval to Firewall Snooze ControlAdministrator Password Click Save SettingsAddress Translation Port By-Pass NaptAddress Translation With NAT Address Translation With Napt − Telnet Redirect selected protocol/service to this routerRedirect selected protocol/service to IP Address − DomainMonitoring Router Health Gateway Health options discussed in this chapterHome Networking Stats StatisticsInternet Stats Security StatsInternet Stats ATM StatisticsEthernet Home Networking Stats Logging System LoggingUpdate Firmware RemoteLocal Diagnostics Miscellaneous Router Options CustomizeColor Palette Language Select Yes for Enable Time Client Time ZoneReboot Internet Access TroubleshootingGeneral Issues Problem Cant connect to the router to configure itFax Contacting Technical SupportTelephone InternetSpecifications Routing Bridging AAL and ATM Support Power Certifications OAM F5Siemens Subscriber Network