Wacom DTF-720 manual Blurring and Protrusion of the Picture from the LCD Panel, Procedure

Page 14

Blurring and Protrusion of the Picture from the LCD Panel

This setting is effective when the product and computer are connected by a RGB cable.

Depending on the type of computer and graphics board, the Auto-Adjust function is sometimes not able to operate at full power, resulting in the picture blurring and protruding from the LCD panel. If

this happens, adjust the pitch and

phase. At 1280 x 1024 pixels, the1 resolution is optimally adjusted.

Procedure:

 

1Open the Tablet Control Panel

 

(see page 18) and select the

 

Calibrate tab.

 

2Click on the Calibrate... button.

2

An adjustment pattern for pitch

 

and phase will appear.

 

3Using the OSD buttons, open the

 

 

 

 

OSD Menu and select the Pitch icon.

 

4Adjust the pitch level so

 

the pattern of fine vertical

 

 

stripes displays evenly.

 

 

5Press the ENTER button

 

 

and return to the Menu

 

 

screen.

 

 

6In the OSD Menu, select the

 

 

Phase icon.

 

 

7Adjust the phase level so

 

 

the adjusutment pattern

 

 

shows clearly.

 

 

8After completing these

 

 

 

 

adjustments, press the EN-

Adjustment pattern for pitch and phase

TER and MENU buttons to exit the OSD Menu.

For Windows system except Windows XP, the pitch and phase may be calibrated after the Exit Windows screen is displayed . If the frequency needs to be calibrated, light and dark vertical stripes will appear in the dark areas of the screen. If the tracking needs to be calibrated, light and shade will appear horizontally in the dark areas of the screen (for 1280 x 1024 resolution).

This method is recommended in situations where the tablet driver has not been installed.

13

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 14
Contents PL-720 Table of Contents PL-720 Users GuideDo not open the back cover Safety PrecautionsRegarding the power plug and power adapter When not using this product for a long period of time Do not use organic solvents to clean this productWhen connecting the power plug Do not let the product get wetWarranty Exclusions Please be aware of the following regarding the LCD displayBack Component FunctionsFront Adjusting the Stand Installing PL-720 on a Mount ArmAccessory Check Connecting PL-720 Computer Installing the Tablet Driver Installing PL-720 DriverWindows Setup Windows Mac OS X SetupUninstalling the Tablet Driver MacintoshPL-720 Display Auto-Adjust FunctionPL-720 Power Saving Function Procedure Blurring and Protrusion of the Picture from the LCD PanelHow to Use the OSD Menu On-Screen Display OSD Menu ButtonsContrast Language ResetTypes of OSD Menus Brightness BacklightHorizontal Center Phase Vertical Center PitchComponent Functions How to use the Tablet ButtonsBasic operation Name FunctionControl Panel Basics Using the Control PanelDisplaying the Control Panel Opening the Control Panel in WindowsSwitch and Button Settings Function Names DescriptionCustomizing the Pop-up Menu Open/RunSynchronizing the Positions of the Pen Tip and Pointer 【Important】 Using Multiple Interactive Pen DisplaysIf Another Monitor Name is Displayed in the Monitor Field Replacing the Pen Nib Supplementary InformationRemoving Stains Remove the pen nib Insert a new nibIf One of These Messages Should Appear TroubleshootingDisplay Troubleshooting If One of These Conditions Should AppearCondition General TroubleshootingTroubleshooting for Windows Troubleshooting for Macintosh SpecificationObtaining Technical Support